Want to see correct answers?
Login or join for free!
  printable Worksheets
Looking for printable worksheets?
Check out our pre-made printable worksheets!
Share/Like This Page
Filter By Grade
Browse Questions

Interior Finishing Questions - All Grades

You can create printable tests and worksheets from these Interior Finishing questions! Select one or more questions using the checkboxes above each question. Then click the add selected questions to a test button before moving to another page.

Previous Page 1 of 7 Next
Continuing Education Architectural Features and Trim
If a molded door casing is used it needs to have a mitered corner. What else can be done to ensure a clean looking finish?
  1. Do a coped joint
  2. Install plinth block between the head and side casings
  3. Use flat stock molding
  4. Use a headless pin nailer
Continuing Education Types of Wall and Ceiling Finishes
Generally in a suspended ceiling the hanger wire is use to support what?
  1. Ceiling lags
  2. Wall angles
  3. Cross tees
  4. Main runners
Continuing Education Types of Wall and Ceiling Finishes
Prior to beginning the installation of the main tees, what must be calculated?
  1. The width of the border tiles
  2. Width of the ceiling tiles
  3. Amount of hanger wire required
  4. Just start installing
Continuing Education Types of Wall and Ceiling Finishes
Continuing Education Types of Wall and Ceiling Finishes
When installing interior wall paneling made of wood, the moisture content of the material should match what?
  1. The moisture content of the interior of the house
  2. The moisture content of the bathroom
  3. The average moisture content of the area it is used
  4. It does not matter
Continuing Education Types of Wall and Ceiling Finishes
When using plywood as an interior wall finish what are some characteristics it should have?
  1. Smooth
  2. Prefinished
  3. Aesthetically pleasing
  4. All of the above
Continuing Education Types of Wall and Ceiling Finishes
Continuing Education Types of Wall and Ceiling Finishes
Continuing Education Types of Wall and Ceiling Finishes
What is one of the benefits of installing a suspended ceiling?
  1. Hides unsightly piping and wires
  2. Very inexpensive
  3. Strong
  4. Easy to clean
Continuing Education Types of Wall and Ceiling Finishes
Continuing Education Architectural Features and Trim
Continuing Education Architectural Features and Trim
Continuing Education Architectural Features and Trim
Continuing Education Architectural Features and Trim
When installing a paint grade casing, at what depth should the fasteners be set too?
  1. At the surface
  2. Slightly above the surface
  3. Slightly below the surface
  4. 1/4" below the surface
Continuing Education Architectural Features and Trim
When installing door casings, the door jamb and wall finish may not be exactly flush. What is done with factory manufactured casings that allows the casing to tight on both the jamb and wall finish?
  1. They can not be used
  2. The door jamb needs to be reinstalled
  3. Casings are backed out, notched on the backside
  4. Additional nails and screws are used in the casing to make it flush
Previous Page 1 of 7 Next
You need to have at least 5 reputation to vote a question down. Learn How To Earn Badges.