Want to see correct answers?
Login or join for free!
  printable Worksheets
Looking for printable worksheets?
Check out our pre-made printable worksheets!
Share/Like This Page
Filter By Grade
Browse Questions

Layout and Planning of Work Questions - All Grades

You can create printable tests and worksheets from these Layout and Planning of Work questions! Select one or more questions using the checkboxes above each question. Then click the add selected questions to a test button before moving to another page.

Previous Page 1 of 6 Next
Continuing Education Types of Drawings Used in Carpentry
When contour lines on a drawing are close together what does it tell you about the property?
  1. The property is steep
  2. The property has a gradual slope
  3. The property has good drainage
  4. The property has a lot of extra fill
Continuing Education Types of Drawings Used in Carpentry
What information would you be able to find on an exterior elevation drawing?
  1. Location of plumbing
  2. Exterior finish
  3. Room size
  4. Location of building on a piece of property
Continuing Education Types of Drawings Used in Carpentry
Continuing Education Types of Drawings Used in Carpentry
Which drawing would you generally refer to for room dimensions?
  1. Foundation plan
  2. Floor plan
  3. Structural plan
  4. Elevation view
Continuing Education Surveying and Plot Plans
A contour line identifies the
  1. size of the land.
  2. slope and elevations of the land.
  3. direction of the land.
  4. direction of the water flow on the land.
Continuing Education Layout and Planning of Work
None Blueprints and Blueprint Reading
Continuing Education Layout and Planning of Work
Continuing Education Layout and Planning of Work
Continuing Education Surveying and Plot Plans
Continuing Education Types of Drawings Used in Carpentry
Why are architectural drawings often referred to as blue prints?
  1. The pens they use are blue
  2. No reason, that's what they are called
  3. An old technique that was used to create drawings
  4. The paper they use is blue
Continuing Education Types of Drawings Used in Carpentry
Continuing Education Types of Drawings Used in Carpentry
Structural plans would generally show what information?
  1. Exterior finishes
  2. Interior finishes
  3. Rebar sizes
  4. Floor finish
Continuing Education Types of Drawings Used in Carpentry
On which drawing would you generally find set backs from property lines?
  1. Elevation view
  2. Floor plan
  3. Plot plan
  4. Section view
Continuing Education Layout and Planning of Work
A building by law is generally created and enforced by the                      .
  1. local community
  2. federal government
  3. state government
  4. owner of the building
Continuing Education Surveying and Plot Plans
Continuing Education Blueprints and Blueprint Reading
Previous Page 1 of 6 Next
You need to have at least 5 reputation to vote a question down. Learn How To Earn Badges.