Business Technology Question
View this question.
Add this question to a group or test by clicking the appropriate button below.
A. Fibers are drawn from reels through a resin bath into a heated die where they are cure. The formed part is then pulled in to another area of the system for machining/finishing.
B. Fibers are put into a single-sided mold and resin is added until the fibers are fully wetted. Then the resin is cured.
C. Continuous strands of fiber are combined into a band and soaked in resin. Excess resin is removed and the band is wound around a mandrel to from a part.
D. Resin is put into a mold and squeezed into the contours of the mold. The resin is then pressurized and heated.
- (A) Filament Winding (B) Compression Molding (D) Open Molding
- (B) Open Molding (C) Filament Winding (D) Pultrusion
- (A) Pultrusion (C) Filaments Winding (D)Compression Molding
- (A) Compression Molding (B) Pultrusion (C) Open Molding
