Want to see correct answers?
Login or join for free!
  printable Worksheets
Looking for printable worksheets?
Check out our pre-made printable worksheets!
Share/Like This Page

Carpentry Questions - All Grades

You can create printable tests and worksheets from these Carpentry questions! Select one or more questions using the checkboxes above each question. Then click the add selected questions to a test button before moving to another page.

Previous Page 14 of 60 Next
None Hand Tools
What is the name of the tools in the photo attached?
Carpentry Tools - Chisels
  1. Butt chisel
  2. Shaver
  3. Pry bar
  4. Chisel
Continuing Education Gypsum and Wallboard
Grade 10 Building Materials
Continuing Education Building Materials
Which of the following characteristics do hardwoods trees have?
  1. Broad leafed
  2. Cone bearing
  3. Grow leaves
  4. Grow Pine needles
Continuing Education Building Materials
Cross laminated wood veneer is another name for what?
  1. Plywood panels
  2. OSB panels
  3. LVL panels
  4. Veneer panels
Continuing Education Building Materials
OSB is an abbreviation for oriented strand board. What does oriented mean?
  1. lined up
  2. rolled together
  3. glued
  4. pressed together
Continuing Education Exterior Framing - Decks, Fences, Porches
When installing fence posts for a fence that is installed 100' long. What is often done to ensure they are installed in a straight line?
  1. A chalk line is snapped on the ground
  2. A line is pulled from the top and bottom from the corner posts
  3. A straight edge is used for each post
  4. Measurements are taken from something running parallel with the fence
Continuing Education Exterior Framing - Decks, Fences, Porches
When does a deck require a railing to be built as part of the design?
  1. When it needs more than 1 rise to access it
  2. When the height of the deck exceeds 2 risers
  3. When the height of the deck is 10" or more
  4. When material below the deck is a hard surface
Continuing Education Exterior Framing - Decks, Fences, Porches
Continuing Education Exterior Installation Techniques and Terminology
When installing cedar beveled siding, vertical butt joints between pieces need to be avoided as much as possible. What must be done IF you need to install beveled siding that requires a vertical joint between two pieces?
  1. Ensure they are staggered from corresponding rows
  2. You are unable to do them
  3. Ensure you leave a large gap for expansion and contraction
  4. Order longer pieces
None Hand Tools
Previous Page 14 of 60 Next
You need to have at least 5 reputation to vote a question down. Learn How To Earn Badges.