Want to see correct answers?
Login or join for free!
  printable Worksheets
Looking for printable worksheets?
Check out our pre-made printable worksheets!
Share/Like This Page

Carpentry Questions - All Grades

You can create printable tests and worksheets from these Carpentry questions! Select one or more questions using the checkboxes above each question. Then click the add selected questions to a test button before moving to another page.

Previous Page 25 of 60 Next
None Screws, Nails, and Fasteners
On a wood screw, there is a portion of the screw that has a smooth shank. Why does a wood screw have this?
  1. To hold it
  2. Easier to remove
  3. Make the screw stronger
  4. Helps to draw two pieces of wood tighter
None Concrete Placement
Grade 9 Hand Tools
None Power Tools
What term is used when a saw has more torque that a standard saw?
  1. Worm drive
  2. High torque
  3. Power saw
  4. Worm Gear
None Roofing
When referencing roofing materials, what does the term "square" describe?
  1. Amount of roofing required to cover 1 sq ft
  2. Amount of roofing required to cover 10 sq ft
  3. Amount of roofing required to cover 100 sq ft
  4. Amount of roofing required to cover 1000 sq ft
None Power Tools
Continuing Education Building Materials
Are soft woods considered to be close-grained or open-grained?
  1. close-grained
  2. open-grained
  3. All of the above
  4. None of the above
Continuing Education Doors and Door Frames
What would be a feature of a french door?
  1. Louvered panel
  2. Contain 1 or more lights of glass
  3. Designed with curves
  4. Made in france
Continuing Education Architectural Features and Trim
In what application would a carpenter use a full round molding?
  1. Closet rod
  2. Between the floor and baseboard
  3. Between two walls
  4. They are not used
Continuing Education Doors and Door Frames
When opening a pocket door, where is the door slid into?
  1. The room you are stepping into
  2. The room your are stepping out of
  3. The partition wall in which it is installed
  4. The outside
Continuing Education Doors and Door Frames
What is one of the main reasons louvered doors would be used?
  1. Less expensive
  2. Easier to install
  3. A unique design
  4. Permit air flow
Continuing Education Doors and Door Frames
Continuing Education Gypsum and Wallboard
What is the recommended distance your first fastener should be placed from the tapered edge of the drywall?
  1. No less that 3/8"
  2. No less than 1/2"
  3. No more than 1 1/2"
  4. No more than 2"
None Interior Stairs and Railings
Which of the following statements is true when describing open stairs?
  1. Built with a hand rail on one side only
  2. Do not have a door on the top or bottom of the stair
  3. Are constructed with no riser material
  4. One side is open to a hallway
None Concrete Placement
Concrete strength is measured in                       .
  1. Pounds per inch
  2. Pounds per square inch
  3. Pounds per yard
  4. Pounds per meter
Grade 11 Carpentry
What is the best saw to make a rip cut?
  1. band saw
  2. chop saw
  3. table saw
  4. scroll saw
Previous Page 25 of 60 Next
You need to have at least 5 reputation to vote a question down. Learn How To Earn Badges.