Want to see correct answers?
Login or join for free!
  printable Worksheets
Looking for printable worksheets?
Check out our pre-made printable worksheets!
Share/Like This Page
Filter By Grade

Continuing Education

Browse Questions

Concrete Forming and Placing Tools Questions - All Grades

You can create printable tests and worksheets from these Concrete Forming and Placing Tools questions! Select one or more questions using the checkboxes above each question. Then click the add selected questions to a test button before moving to another page.

Continuing Education Concrete Forming and Placing Tools
A screed board needs to be made out of magnesium or aluminum for it to work correctly.
  1. True
  2. False
Continuing Education Concrete Forming and Placing Tools
Once concrete is poured it is impossible to change the final finish of it.
  1. True
  2. False
Continuing Education Concrete Forming and Placing Tools
What tool is used to create a textured finish on a concrete slab?
  1. Texturizer
  2. Power float
  3. Broom
  4. Rake
Continuing Education Concrete Forming and Placing Tools
What tool is used to ensure the concrete adequately flows around rebar and all excess air is removed?
  1. Trowel
  2. Vibrator
  3. Tamper
  4. Screed board
Continuing Education Concrete Forming and Placing Tools
What are used to allow the concrete finisher to walk on concrete for final troweling work?
  1. Screed boards
  2. Kneeling boards
  3. Bull floats
  4. Knee floats
Continuing Education Concrete Forming and Placing Tools
If a tool is being used for placing fresh concrete when must it be cleaned?
  1. Before the concrete is poured
  2. Right after the concrete is poured
  3. Once the tool is finished being used
  4. Does not need to be cleaned
Continuing Education Concrete Forming and Placing Tools
Why would a magnesium float be preferred over a wooden float?
  1. It is lighter
  2. It pulls more concrete
  3. It is less expensive
  4. All of the above