Want to see correct answers?
Login or join for free!
  printable Worksheets
Looking for printable worksheets?
Check out our pre-made printable worksheets!
Share/Like This Page
Filter By Grade
Browse Questions

Interior Finishing Questions - All Grades

You can create printable tests and worksheets from these Interior Finishing questions! Select one or more questions using the checkboxes above each question. Then click the add selected questions to a test button before moving to another page.

Previous Page 3 of 7 Next
Continuing Education Architectural Features and Trim
In what application would a carpenter use a full round molding?
  1. Closet rod
  2. Between the floor and baseboard
  3. Between two walls
  4. They are not used
Continuing Education Doors and Door Frames
When opening a pocket door, where is the door slid into?
  1. The room you are stepping into
  2. The room your are stepping out of
  3. The partition wall in which it is installed
  4. The outside
Continuing Education Doors and Door Frames
What is one of the main reasons louvered doors would be used?
  1. Less expensive
  2. Easier to install
  3. A unique design
  4. Permit air flow
Continuing Education Doors and Door Frames
Continuing Education Gypsum and Wallboard
What is the recommended distance your first fastener should be placed from the tapered edge of the drywall?
  1. No less that 3/8"
  2. No less than 1/2"
  3. No more than 1 1/2"
  4. No more than 2"
None Interior Stairs and Railings
Which of the following statements is true when describing open stairs?
  1. Built with a hand rail on one side only
  2. Do not have a door on the top or bottom of the stair
  3. Are constructed with no riser material
  4. One side is open to a hallway
Continuing Education Types of Wall and Ceiling Finishes
Prior to beginning the installation of the main tees, what must be calculated?
  1. The width of the border tiles
  2. Width of the ceiling tiles
  3. Amount of hanger wire required
  4. Just start installing
Continuing Education Types of Wall and Ceiling Finishes
Continuing Education Types of Wall and Ceiling Finishes
When installing interior wall paneling made of wood, the moisture content of the material should match what?
  1. The moisture content of the interior of the house
  2. The moisture content of the bathroom
  3. The average moisture content of the area it is used
  4. It does not matter
Continuing Education Architectural Features and Trim
When installing door casings, the door jamb and wall finish may not be exactly flush. What is done with factory manufactured casings that allows the casing to tight on both the jamb and wall finish?
  1. They can not be used
  2. The door jamb needs to be reinstalled
  3. Casings are backed out, notched on the backside
  4. Additional nails and screws are used in the casing to make it flush
Continuing Education Gypsum and Wallboard
None Cabinetry
Previous Page 3 of 7 Next
You need to have at least 5 reputation to vote a question down. Learn How To Earn Badges.