Want to see correct answers?
Login or join for free!
  printable Worksheets
Looking for printable worksheets?
Check out our pre-made printable worksheets!
Share/Like This Page
Filter By Grade

You are browsing Continuing Education questions. View questions in All Grades.

Continuing Education

Continuing Education Interior Finishing Questions

You can create printable tests and worksheets from these Continuing Education Interior Finishing questions! Select one or more questions using the checkboxes above each question. Then click the add selected questions to a test button before moving to another page.

Previous Page 1 of 4 Next
Continuing Education Types of Wall and Ceiling Finishes
Continuing Education Architectural Features and Trim
If a molded door casing is used it needs to have a mitered corner. What else can be done to ensure a clean looking finish?
  1. Do a coped joint
  2. Install plinth block between the head and side casings
  3. Use flat stock molding
  4. Use a headless pin nailer
Continuing Education Architectural Features and Trim
Continuing Education Architectural Features and Trim
Where in a room would crown molding be used?
  1. Between the floor and the wall
  2. Around a door
  3. Between two corners
  4. Between the wall and the ceiling
Continuing Education Architectural Features and Trim
Continuing Education Types of Wall and Ceiling Finishes
Continuing Education Architectural Features and Trim
When installing stain grade casing what is most important?
  1. Flush at the front face of the casing
  2. Flush on the back side of the casing
  3. No need to be flush as it can be sanded
  4. Tight gap between the floor and the casing
Continuing Education Architectural Features and Trim
Where would you find a base shoe molding?
  1. Between two walls
  2. Between the floor and baseboard
  3. Between the wall and floor
  4. Between the wall and the ceiling
Continuing Education Architectural Features and Trim
Continuing Education Doors and Door Frames
Continuing Education Doors and Door Frames
Continuing Education Types of Wall and Ceiling Finishes
Generally in a suspended ceiling the hanger wire is use to support what?
  1. Ceiling lags
  2. Wall angles
  3. Cross tees
  4. Main runners
Continuing Education Architectural Features and Trim
Continuing Education Types of Wall and Ceiling Finishes
Prior to beginning the installation of the main tees, what must be calculated?
  1. The width of the border tiles
  2. Width of the ceiling tiles
  3. Amount of hanger wire required
  4. Just start installing
Continuing Education Types of Wall and Ceiling Finishes
Previous Page 1 of 4 Next
You need to have at least 5 reputation to vote a question down. Learn How To Earn Badges.