Want to see correct answers?
Login or join for free!
  printable Worksheets
Looking for printable worksheets?
Check out our pre-made printable worksheets!
Share/Like This Page
Filter By Grade

Grade 10 College Continuing Education

Browse Questions

Screws, Nails, and Fasteners Questions - All Grades

You can create printable tests and worksheets from these Screws, Nails, and Fasteners questions! Select one or more questions using the checkboxes above each question. Then click the add selected questions to a test button before moving to another page.

Previous Page 2 of 4 Next
None Screws, Nails, and Fasteners
On a wood screw, there is a portion of the screw that has a smooth shank. Why does a wood screw have this?
  1. To hold it
  2. Easier to remove
  3. Make the screw stronger
  4. Helps to draw two pieces of wood tighter
None Screws, Nails, and Fasteners
What is the name of the sharp point of a screw?
  1. Driving point
  2. Gimlet point
  3. Fastening point
  4. Screw point
None Screws, Nails, and Fasteners
This type of anchor is used to secure bolts in solid walls.
  1. Drywall screws
  2. Toggle bolts
  3. Drywall anchor
  4. Wedge anchor
None Screws, Nails, and Fasteners
How would you attach the sill plate to the top of a concrete wall?
  1. PL premium glue between the sill plate and foundation wall
  2. a bead of caulking
  3. use a powder actuated nailer to fasten
  4. pre place anchor bolts in wet foundation wall and fasten the sill plate with bolts and washers
None Screws, Nails, and Fasteners
Over time a dark stain begins to appear around a fastener that was used to fasten cedar trim to the exterior of a house. What is causing this?
  1. Wood contained a fungi that is causing it to react with the fastener
  2. Reaction between the fastener and the oils in the wood
  3. Cedar should not be used on the exterior of a building
  4. To many fasteners were used and "bruised" the wood
None Screws, Nails, and Fasteners
A screw has a larger                 strength than a nail.
  1. pull out
  2. resistant
  3. withdrawal
  4. lateral
None Screws, Nails, and Fasteners
Which screw would be best when attaching metal cladding to a plywood sheathing?
  1. deck screws
  2. galvanized screws
  3. self sealing screws
  4. self tapping screws
None Screws, Nails, and Fasteners
A nail has a better withdrawal strength than a screw.
  1. True
  2. False
None Screws, Nails, and Fasteners
A split fast anchor can be used in a solid concrete wall or floor. What is one characteristic of the split fast anchor?
  1. Has a curve on the end
  2. Is very long
  3. Does not last very long
  4. The hole needs to be large than the anchor
None Screws, Nails, and Fasteners
What is something unsightly about using a toggle bolt?
  1. You can't use them in drywall
  2. It does not hold very welll
  3. You need to drill a large hole
  4. You only get one shot
Previous Page 2 of 4 Next