Want to see correct answers?
Login or join for free!
  Math Worksheets
Looking for Math worksheets?
Check out our pre-made Math worksheets!
Share/Like This Page
Filter By Grade

Trigonometry Questions - All Grades

You can create printable tests and worksheets from these Trigonometry questions! Select one or more questions using the checkboxes above each question. Then click the add selected questions to a test button before moving to another page.

Previous Page 10 of 56 Next
Grade 11 Trigonometry CCSS: HSF-TF.B.6
Grade 11 Trigonometry CCSS: HSF-TF.B.5
The following table gives the average monthly visitor count (in thousands) at a national park based on historical averages. Which function best models this data, where V is in thousands and m is months? Let m=0 be January.
  1. [math]V(m)=18.5cos⁡(πm/6)+23.5[/math]
  2. [math]V(m)=18.5sin⁡(πm/6)+23.5[/math]
  3. [math]V(m)=-18.5cos⁡(πm/6)+23.5[/math]
  4. [math]V(m)=-18.5cos⁡(πm/12)+23.5[/math]
Grade 11 Trigonometry CCSS: HSF-TF.B.6
For f(x) = tan(2x), why would a standard domain restriction be [math]−π/4 < x < π/4[/math] instead of [math]0 ≤ x < π/2[/math]?
  1. The interval [math][0, π/2)[/math] contains a vertical asymptote at x = [math]π/4[/math].
  2. The interval [math](−π/4, π/4)[/math] centers the function around the origin.
  3. On [math][0, π/2)[/math] , tan(2x) is not strictly increasing due to the asymptote.
  4. Both a and c are correct.
Grade 11 Trigonometry CCSS: HSF-TF.B.6
For f(x) = cot(x), why is the standard domain restriction [math]0 < x < π[/math] instead of [math]−π/2 < x < π/2[/math]?
  1. The interval [math](−π/2, π/2)[/math] includes 0 where cotangent is undefined.
  2. The interval [math](0, π)[/math] ensures the inverse cotangent’s range is [math](0, π)[/math], matching the inverse tangent’s complementary relationship.
  3. On [math](−π/2, π/2)[/math] , cotangent is not strictly decreasing everywhere.
  4. Both b and c are correct.
Grade 11 Trigonometry CCSS: HSF-TF.B.5
What is the period of [math]y=5sec⁡((5π)/6x+π)+2[/math]?
  1. [math] 12/5[/math]
  2. [math] 5pi/6[/math]
  3. [math] 6/5[/math]
  4. [math] 2pi[/math]
Grade 11 Trigonometry CCSS: HSF-TF.B.6
In some advanced mathematics contexts, the inverse secant function is defined with the domain restriction [math][π, (3π)/2)[/math] for f(x) = sec(x). Why might this alternative restriction be used instead of the conventional [math][0, π] \ {π/2}[/math]?
  1. This restriction places the range of the inverse secant entirely within the third quadrant, which can simplify certain integral formulas in calculus.
  2. On [math][π, (3π)/2)[/math] , the secant function is continuous and strictly increasing, avoiding the discontinuity at [math]π/2[/math] found in the conventional domain.
  3. It ensures the inverse secant function is an odd function, making it symmetric about the origin.
  4. The range [math][π, (3π)/2)[/math] corresponds to angles where the cosine is positive, matching the principal value of the inverse cosine.
Grade 11 Trigonometry CCSS: HSF-TF.B.5
Grade 11 Trigonometry CCSS: HSF-TF.B.5
What is the midline of j(x) = −4cos(5x − 1) + 0.5 ?
  1. y = −4
  2. y = 4.5
  3. y = −3.5
  4. y = 0.5
Grade 11 Trigonometry CCSS: HSF-TF.B.6
The inverse of f(x) = csc(x) is not a function unless the domain of f(x) is restricted. Which of the following domain restrictions would ensure that f⁻¹(x) is a function? Choose all correct answers.
  1. [math]−π/2 ≤ x ≤ π/2, x ≠ 0[/math]
  2. [math]π/2 ≤ x ≤ (3π)/2, x ≠ π[/math]
  3. [math]−π ≤ x ≤ 0, x ≠ −π/2[/math]
  4. [math]0 ≤ x ≤ π, x ≠ π/2[/math]
Grade 11 Trigonometry CCSS: HSF-TF.B.5
What is the period of [math]y=−4sin⁡((3π)/5x+π/4)+2[/math]?
  1. [math]10/3[/math]
  2. [math]5/3[/math]
  3. [math]2pi/3[/math]
  4. [math]2pi[/math]
Grade 11 Trigonometry CCSS: HSF-TF.B.5
State the amplitude of the function [math]y=−7/4cos⁡(πx−2)[/math].
  1. [math]-7/4[/math]
  2. [math]7/4[/math]
  3. [math]pi[/math]
  4. 2
  5. none of these are correct
Grade 11 Trigonometry CCSS: HSF-TF.B.6
A student is asked to define the inverse sine function. They propose using the domain [math][π/2, (3π)/2][/math] for f(x) = sin(x) to construct sin⁻¹(x). Why would this domain choice be mathematically valid but not conventional?
  1. On this interval, sine is strictly decreasing, so the inverse would be a function, but it would map positive inputs to angles in the second and third quadrants, which is less intuitive for geometric applications.
  2. This interval includes values where sine is negative, which violates the rule that inverse trigonometric functions must have non-negative outputs.
  3. The sine function is not one-to-one on [math][π/2, (3π)/2][/math] because it repeats values from the first and fourth quadrants
  4. The range of sine on this interval is [−1, 0], so the inverse would not be defined for positive inputs.
Grade 11 Trigonometry CCSS: HSF-TF.B.6
For f(x) = sec(2x), why is a typical domain restriction [math]0 ≤ x ≤ π/2, x ≠ π/4[/math] instead of [math]−π/4 ≤ x ≤ π/4, x ≠ 0[/math]?
  1. The interval [math][−π/4, π/4][/math] excluding 0 makes the secant function even over the domain, preventing a one-to-one mapping.
  2. The restriction [math][0, π/2][/math] excluding [math]π/4[/math] ensures the inverse function’s range is [math][0, pi/2[/math] excluding [math]π/4[/math], which matches the principal branch of arcsecant.
  3. On [math][−π/4, π/4][/math] excluding 0, the secant function is not monotonic due to symmetry about the y-axis.
  4. Both a and c are correct.
Grade 11 Trigonometry CCSS: HSF-TF.B.5
Previous Page 10 of 56 Next
You need to have at least 5 reputation to vote a question down. Learn How To Earn Badges.