Want to see correct answers?
Login or join for free!
  printable Worksheets
Looking for printable worksheets?
Check out our pre-made printable worksheets!
Share/Like This Page
Filter By Grade

Grade 9 Grade 10 Grade 11 College Continuing Education

Browse Questions

Carpentry Skills and Tools Questions - All Grades

You can create printable tests and worksheets from these Carpentry Skills and Tools questions! Select one or more questions using the checkboxes above each question. Then click the add selected questions to a test button before moving to another page.

Previous Page 4 of 21 Next
Continuing Education Hand Tools
To maximize the striking force when using a hammer the user should hold the hammer on the                        .
  1. Top
  2. End of the handle
  3. Top of the handle
  4. Below the striking face
None Power Tools
When you need to do a plunge cut with a circular saw, what needs to be done to one of the safety devices on the tools?
  1. Press the safety on trigger
  2. Wear safety glasses
  3. Ensure the GFCI is connected
  4. Pull the guard back
Continuing Education Hand Tools
What type of saw is used to cut along the grain of wood?
  1. Cross cut saw
  2. Rip saw
  3. Miter saw
  4. Coping saw
None Power Tools
When using a table saw or jointer it is recommended to use a push stick for what reason?
  1. To add additional pressure to the material
  2. Avoid having your fingers near the blade
  3. It is the only way the tool works
  4. Prevents kickback
None Screws, Nails, and Fasteners
What is the best type of adhesive to use when a moisture and uv resistant is required?
  1. Construction adhesive
  2. Urethane glue
  3. Regular wood glue
  4. Contact cement
None Power Tools
Identify the tool in the image.
Carpentry Tools - Circular Saw
  1. Hand saw
  2. Chop saw
  3. Skill saw
  4. Circular saw
Continuing Education Power Tools
What tool is used to create holes in masonry or concrete?
  1. Powder actuated nailer
  2. Hammer drill
  3. Power drill
  4. Concrete nailer
Continuing Education Hand Tools
Aviation snips, or tin snips have different colors on their handles. What do these colors represent?
  1. Comfort level of the tool
  2. Direction of travel when cutting
  3. Age of the tool
  4. The type of material that they can cut
None Hand Tools
Which of the tools below is best suited to cut the hinge gain in a door frame?
  1. Wood chisel
  2. Hammer
  3. Nail bar
  4. Block plane
Continuing Education Building Materials
What is particle board made of?
  1. Wood flakes
  2. Resin
  3. Wood dust
  4. All of the above
Continuing Education Building Materials
Why does one side of an OSB panel generally have a texture?
  1. Safety measure to avoid slipping
  2. Give it a better appearance
  3. Prevents buckling
  4. No reason, it is due to the machines that manufacture it
None Building Materials
Both plywood and LVL's are made up of multiple layers or veneers of wood. What is one of the main differences in the manufacture process of plywood vs LVL?
  1. Plywood layers grain are run opposite, LVL layers grain are run parallel
  2. Plywood layers use less glue than LVL layers
  3. LVL glue is rated for exterior use, and plywood glue is not
  4. Plywood is made for wood frame construction, LVL's are not
Continuing Education Screws, Nails, and Fasteners
The metal connector on a trussed roof is called a gusset plate.
  1. True
  2. False
None Power Tools
Identify the tool in the image.
Carpentry Tools - Cordless Drill
  1. Cordless drill
  2. Hand drill
  3. Power drill
  4. Impact drill
Previous Page 4 of 21 Next