Want to see correct answers?
Login or join for free!
  printable Worksheets
Looking for printable worksheets?
Check out our pre-made printable worksheets!
Share/Like This Page
Filter By Grade

Grade 9 Grade 10 Grade 11 College Continuing Education

Browse Questions

Carpentry Skills and Tools Questions - All Grades

You can create printable tests and worksheets from these Carpentry Skills and Tools questions! Select one or more questions using the checkboxes above each question. Then click the add selected questions to a test button before moving to another page.

Previous Page 5 of 21 Next
Continuing Education Building Materials
Which of the following soft woods would be least efficient in exterior uses?
  1. Cedar
  2. Redwood
  3. Cypress
  4. Pine
None Building Materials
When the term "dimension lumber" is used for grading lumber what is it describing?
  1. Lumber cut to certain lengths
  2. Lumber that has been planed
  3. Lumber named by sizes (2x4, 2x6, 2x8)
  4. Any boards that are less than a 2x10
None Screws, Nails, and Fasteners
Which type of nail is generally used in wood frame construction?
  1. Common
  2. Duplex
  3. Casing
  4. Ardox
Continuing Education Building Materials
Which type of softwood tree produces some of the hardest lumber?
  1. Pine
  2. Fir
  3. Cedar
  4. Spruce
None Power Tools
Identify the tool in the image.
Carpentry Tools - Jigsaw
  1. Jig saw
  2. Reciprocating saw
  3. Circular saw
  4. Plunge saw
None Power Tools
Electric compressors should be plugged directly into the power source whenever possible because
  1. they have small cords.
  2. are loud and should be as far away from workers as possible.
  3. are very heavy and difficult to lift into place.
  4. they require a lot of power.
None Building Materials
What are the primary uses for PSL lumber?
  1. Beams and posts
  2. Walls and ceilings
  3. Floors and sheathing
  4. Rafters and studs
None Power Tools
Identify the tool in the image.
Carpentry Tools - Angle Grinder
  1. Grinder
  2. Cut off saw
  3. Hand grinder
  4. Rotating saw
None Hand Tools
Identify the tool in the image.
Carpentry Tools - Tape Measure
  1. Tape measure
  2. Long tape
  3. Combination measure
  4. Pocket measure
None Tool Safety
What is one way to ensure a hand tool does not injure the user when it is being used?
  1. Make sure they are clean
  2. Proper maintenance
  3. Leave unplugged if not in use
  4. Don't use them
Previous Page 5 of 21 Next