Want to see correct answers?
Login or join for free!
  printable Worksheets
Looking for printable worksheets?
Check out our pre-made printable worksheets!
Share/Like This Page
Filter By Grade

You are browsing Continuing Education questions. View questions in All Grades.

Grade 8 Grade 9 Grade 10 Grade 11 Grade 12 Continuing Education

Browse Questions

Continuing Education Construction Questions

You can create printable tests and worksheets from these Continuing Education Construction questions! Select one or more questions using the checkboxes above each question. Then click the add selected questions to a test button before moving to another page.

Previous Page 2 of 2 Next
Continuing Education Construction
If a rotation bearing has an intital turntable tilt measurement of 0.110"-at what measurement should this bearing be replaced?
  1. 0.175"
  2. 0.150"
  3. 0.125"
Continuing Education Construction
What is the recommended lubricant used on the leveling chains?
  1. Wire cable/ chain lube
  2. Hydraulic oil
  3. Multi-purpose grease
  4. Motor oil
Continuing Education Construction
If the hydraulic oil appears to be cloudy or have a milky appearance, what causes this condition?
  1. Antifreeze present in the system
  2. Water or wax present in the system
  3. Engine oil present in the system
Continuing Education Construction
Generally speaking, how much of an increase in the turntable tilt measurement from its intial measurement is acceptable before the rotation bearing is reaching the end of its useful life?
  1. 0.065' of deflection
  2. 0.050" of deflection
  3. 0.025" of deflection
Continuing Education Construction
If the rotation bearing mounting bolts are 3/4-10 high-strenght (Bowmalloy) bolts, what is there installed torque value.
  1. 275 ft-lbs
  2. 325 ft-lbs
  3. 250 ft-lbs
Continuing Education Construction
How many bolts hold the turntable to the rotation bearing?
  1. 16 Bolts
  2. 23 Bolts
  3. 25 Bolts
  4. 14 Bolts
Continuing Education Construction
How many bolts hold the rotation bearing to the pedestal of a LRV?
  1. 12 Bolts
  2. 14 Bolts
  3. 16 Bolts
  4. 18 Bolts
Continuing Education Construction
A person welding on a critical component of aerial device must be certified to what standard?
  1. AWS D1.1
  2. Certification not required
  3. ANSI Z87
Continuing Education Construction
What is the recommended lubricant used on the ball joints and connections of the upper control pistol grip linkage?
  1. General purpose spray lube (WD-40, LPS-3)
  2. Motor Oil
  3. Chain oil
Continuing Education Construction
The weakest part of a carabiner is:
  1. spine
  2. gate
  3. nose
Continuing Education Construction
What is the recommended lubricant used on the outrigger inner tube surface?
  1. Dry moly spray
  2. Dry graphite spray
  3. Multi purpose grease
Continuing Education Construction
Why should you not use steel wool to smooth out surface scratches on the upper boom or insert?
  1. Steel wool will leave small metalic particles that may provide a path for electricity
  2. Steel wool costs to much
  3. Steel wool is to rough on the boom finish
Continuing Education Construction
What is the recommended lubricant used on the rotation bearing gear teeth?
  1. Open face gear lube or moly lube
  2. Any type of grease
  3. Spray lube
Continuing Education Construction
What are the main characteristics of each type of plastic?
Continuing Education Construction
Name the two main types of plastic
Continuing Education Construction
What do the letters PVC stand for?
Previous Page 2 of 2 Next