Want to see correct answers?
Login or join for free!
  printable Worksheets
Looking for printable worksheets?
Check out our pre-made printable worksheets!
Share/Like This Page
Filter By Grade

You are browsing None questions. View questions in All Grades.

Grade 9 Grade 10 Continuing Education

None Navy Questions

You can create printable tests and worksheets from these None Navy questions! Select one or more questions using the checkboxes above each question. Then click the add selected questions to a test button before moving to another page.

Previous Page 2 of 11 Next
None Navy
The 7 Tangential struts provide proper alignment during rapid....
  1. Cooling
  2. Heat Transition
  3. Fire
  4. Speed Transitions
None Navy
What are the variable climatic factors that affect air density which in turn affect mass air flow and thrust?
  1. Air Temperature, Pressure altitude, and Humidity
  2. Air Temperature, RPM, Humidity
  3. Pressure Altitude, RPM, Static Air
  4. Humidity, Depersonification Altitude, Air Temperature
None Navy
                  Cycle's Function: Pressure remains relatively constant, but a marked increase in volume takes place.
  1. Intake Cycle
  2. Compression Cycle
  3. Expansion Cycle
  4. Exhaust Cycle
None Navy
What does the Pressure Regulating Valve maintain Reduction Gear Oil pressure at?
  1. 50 - 60 psi
  2. 150 - 250 psi
  3. 150 - 250 *C
  4. 50 - 66 psi
None Navy
                 Cycle's Funtion: Provides a large increase in air pressure and decrease in air volume.
  1. Intake Cycle
  2. Compression Cycle
  3. Expansion Cycle
  4. Exhaust Cycle
None Navy
The Coordinator produces mechanical outputs to                                             Fuel Control and Propeller Linkage System                                            
None Navy
                 Cycle's Function: Converts the expanding volume and decreasing pressure of the gases to a final high velocity.
  1. Intake Cycle
  2. Compression Cycle
  3. Expansion Cycle
  4. Exhaust Cycle
None Navy
What is a hydromechanical device that operates by oil pressure and helical spline action?
  1. Propeller Brake
  2. Pressure Transmitter
  3. Thrust Sensitive Sensing
  4. Torque Meter Shroud
None Navy
The Fuel Transfer Pumps are located in               
  1. Tank 2
  2. Tank 3
  3. Tank 5
  4. Tank 5A
None Navy
Where are the Magnetic Chip Detectors located?
  1. Front of Power Section
  2. Mounted between Combustion and Compressor
  3. Engine Check Panel
  4. Scavenge Pumps Outlet
None Navy
Oil Consumption is                0.35 Gallons                per          1 hour         
None Navy
What mechanically disconnects Power Section from RGB when NTS can no longer limit Negative Torque?
  1. E - Handle
  2. Safety Coupling
  3. Torquemeter
  4. Feather Valve
None Navy
Where does the TIT send its signal to?
  1. Flight Station and TIT indicators
  2. TIT indicators and TD Control Amplifier
  3. TD Control Amplifier and Turbine Temp Switch
  4. Thermacouples and TIT Indicators
None Navy
What are the Electrical Functions of the E-Handle?
None Navy
What contains feedback pentiometer, magnetic clutch, and electric motor and gear and receives electrical inputs from synchrophaser above 32* power lever position?
  1. Pulse Generator
  2. Syncrophasing
  3. Master Sync
  4. Speed Bias Servomotor Assembly
None Navy
How long after engine shut down should oil quantity be checked?
  1. 25 min
  2. 30 min
  3. 45 min
  4. 1 hour
None Navy
CTM is the force resulting from centrifugal force and is always present.
  1. True
  2. False
None Navy
The sensing element can still sense an overheat condition if there is a break and the system test will still operate
  1. True
  2. False
None Navy
What is the objective of Divergent Ducts?
  1. Increase Pressure, Decrease Speed
  2. Decrease RPM, Decrease Pressure
  3. Increase Speed, Decrease Pressure
  4. Increase RPM, Decrease Pressesure
None Navy
The Fuel Transfer Pump Low Pressure Lights indicate output pressure has dropped below                
  1. 2psi
  2. 4psi
  3. 6psi
  4. 8psi
Previous Page 2 of 11 Next