Want to see correct answers?
Login or join for free!
  printable Worksheets
Looking for printable worksheets?
Check out our pre-made printable worksheets!
Share/Like This Page
Filter By Grade

You are browsing Continuing Education questions. View questions in All Grades.

Grade 9 Grade 10 Grade 11 Grade 12 College Continuing Education

Continuing Education Carpentry Questions

You can create printable tests and worksheets from these Continuing Education Carpentry questions! Select one or more questions using the checkboxes above each question. Then click the add selected questions to a test button before moving to another page.

Previous Page 12 of 17 Next
Continuing Education Doors and Door Frames
At which point during the construction process are the interior doors installed?
  1. After painting is complete
  2. After the finish wall material is installed
  3. After casing and baseboard is installed
  4. After framing is completed
Continuing Education Layout and Planning of Work
Continuing Education Gypsum and Wallboard
When installing gypsum board in commercial applications, what is often specified to increase the fire and sound resistance of the gypsum wall?
  1. Use adhesive between studs and gypsum
  2. Extra screws
  3. Double layer of drywall
  4. Use thicker drywall mud
Continuing Education Types of Wall and Ceiling Finishes
When using plywood as an interior wall finish what are some characteristics it should have?
  1. Smooth
  2. Prefinished
  3. Aesthetically pleasing
  4. All of the above
Continuing Education Power Tools
You need to fasten a 2x6 piece of lumber into a steel beam. What is the recommended tool for this?
  1. Framing nailer
  2. Powder actuated nailer
  3. Palm nailer
  4. Concrete nailer
Continuing Education Power Tools
Often times a bench grinder is installed in a wood shop. What is it used for?
  1. Sharpen chisels
  2. Remove rust from tools
  3. Sharpen blades
  4. All of the above
Continuing Education Surveying and Plot Plans
What is identified on all plot plans?
  1. True directional north
  2. Neighboring houses
  3. Main floor square footage
  4. Roof style
Continuing Education Surveying and Plot Plans
Continuing Education Building Materials
Are soft woods considered to be close-grained or open-grained?
  1. close-grained
  2. open-grained
  3. All of the above
  4. None of the above
Continuing Education Doors and Door Frames
What would be a feature of a french door?
  1. Louvered panel
  2. Contain 1 or more lights of glass
  3. Designed with curves
  4. Made in france
Continuing Education Architectural Features and Trim
In what application would a carpenter use a full round molding?
  1. Closet rod
  2. Between the floor and baseboard
  3. Between two walls
  4. They are not used
Continuing Education Doors and Door Frames
When opening a pocket door, where is the door slid into?
  1. The room you are stepping into
  2. The room your are stepping out of
  3. The partition wall in which it is installed
  4. The outside
Continuing Education Doors and Door Frames
What is one of the main reasons louvered doors would be used?
  1. Less expensive
  2. Easier to install
  3. A unique design
  4. Permit air flow
Previous Page 12 of 17 Next
You need to have at least 5 reputation to vote a question down. Learn How To Earn Badges.