Want to see correct answers?
Login or join for free!
  printable Worksheets
Looking for printable worksheets?
Check out our pre-made printable worksheets!
Share/Like This Page

Other Questions - All Grades

You can create printable tests and worksheets from these Other questions! Select one or more questions using the checkboxes above each question. Then click the add selected questions to a test button before moving to another page.

Previous Page 147 of 349 Next
None Building Materials
Engineered lumber products (ELP) are gaining popularity in the construction industry for their high strength, minimal shrinkage, and availability. Engineered wood products have been show to use                 more of a tree than conventional lumber.
  1. 50%
  2. 10%
  3. 25%
  4. 35%
None Screws, Nails, and Fasteners
A split fast anchor can be used in a solid concrete wall or floor. What is one characteristic of the split fast anchor?
  1. Has a curve on the end
  2. Is very long
  3. Does not last very long
  4. The hole needs to be large than the anchor
None Screws, Nails, and Fasteners
What is something unsightly about using a toggle bolt?
  1. You can't use them in drywall
  2. It does not hold very welll
  3. You need to drill a large hole
  4. You only get one shot
Grade 1 God's Plan of Salvation
Why do we not have to sacrifice animals anymore?
  1. Jesus' blood washes away our sins.
  2. There are no more animals to sacrifice.
  3. We don't sin.
None Screws, Nails, and Fasteners
What kind of anchor would you need to use when fastening a shelf to a solid concrete wall? You need to ensure it has a very good pull out resistance rating.
  1. Epoxy Anchor
  2. Toggle Bolt
  3. Wedge anchor
  4. Sleeve anchor
None Floor Framing
The framing member that runs parallel the floor joists around the stairwell opening is called a header joists
  1. True
  2. False
None Kitchen Safety and Sanitation
Which of the following are acceptable ways of extinguishing a fire?
  1. Deny it oxygen.
  2. Disrupt the flame's chain reaction by using a dry chemical extinguisher.
  3. Remove the fire's fuel supply.
  4. Cool the fire's fuel below its combustion point.
  5. all of the above
None Roof Framing
What is one the main reasons cross purlins may be installed on top of ceiling joists?
  1. extra support for the roof
  2. more space for insulation
  3. make the roof higher
  4. provide cross ventilation
Continuing Education Occupational Safety (OSHA)
OSHA requires employers to ensure that employees have and use                                 personal protective equipment                                (PPE) when required for safety and health.
None Doors and Door Frames
A door jamb is 3/4" thick and you need to add 1/2" one each side to allow the shimming of the frame level. What is the rough opening width size for a door that is 2'6" wide?
  1. 32"
  2. 32 1/4"
  3. 32 1/2"
  4. 32 3/4"
Grade 6 Teachings of the Bible
Who conquered Israel and scattered the tribes across their empire?
  1. Zealots
  2. Prophets
  3. Persians
  4. Rabbis
  5. Chaldeans
  6. Assyrians
None Floor Framing
When a cantilevered floor joist is used how far must the non cantilevered portion of the joist extend? For every 1 ft of cantilever the floor joist must extend                 times.
  1. 1
  2. 2
  3. 3
  4. 4
None Power Tools
What type of sander is aggressive and rotates a                 of varying grits. This type of sander is called a                 sander.
  1. belt
  2. oscillating
  3. palm
  4. orbital
None Roofing
When installing roof shingles you need to start your work at the                 of the roof. You need to maintain a positive slope so the roof drains water.
  1. bottom
  2. left
  3. right
  4. top
None Roofing
When applying asphalt shingles to a roof deck you need to ensure each layer overlaps the layer below it. Why is this done?
  1. Ensure water does not get in
  2. Ensure the nails from the layer below are covered
  3. Ensure the glue of the shingle adheres to the one below
  4. All of the above
None Roofing
When roofing felt is described as #60 roofing felt, what does the 60 stand for?
  1. weight per roof
  2. weight per roll
  3. weight per square foot
  4. weight per square
None Roofing
A roof needs to be covered with 2 layer of #15 asphalt felt. Each roll covers 1 square of roof area. The roof measures 18'x18' on one side and 18'x15' on the other.

How many rolls of asphalt felt are required to cover the roof? Round up to the nearest role.
  1. 6
  2. 4
  3. 3
  4. 5
None Roofing
What needs to be installed prior to the roof shingles being installed?
  1. Underlayment
  2. Step flashing
  3. Head flashing
  4. Roof cap
None Roofing
What type of wood is used to make wooden roof shingles?
  1. Cedar
  2. Cypress
  3. Fir
  4. Redwood
None Converting Measurements
To convert 1 inch to millimeters you need to multiply it by        25.4       .
Previous Page 147 of 349 Next
You need to have at least 5 reputation to vote a question down. Learn How To Earn Badges.