Want to see correct answers?
Login or join for free!
  printable Worksheets
Looking for printable worksheets?
Check out our pre-made printable worksheets!
Share/Like This Page

Other Questions - All Grades

You can create printable tests and worksheets from these Other questions! Select one or more questions using the checkboxes above each question. Then click the add selected questions to a test button before moving to another page.

Previous Page 29 of 349 Next
Grade 3 Christian Studies
There are 27 books in the Old Testament
  1. True
  2. False
Grade 3 Christian Studies
There are      2     main parts to the Bible
None Hand Tools
What tool can be adjusted to transcribe angles from a location onto a piece of material?
  1. Protractor
  2. Chalk line
  3. T Bevel
  4. Speed square
None Building Materials
Both plywood and LVL's are made up of multiple layers or veneers of wood. What is one of the main differences in the manufacture process of plywood vs LVL?
  1. Plywood layers grain are run opposite, LVL layers grain are run parallel
  2. Plywood layers use less glue than LVL layers
  3. LVL glue is rated for exterior use, and plywood glue is not
  4. Plywood is made for wood frame construction, LVL's are not
None Dimensional and Engineered Framing Members
Framing lumber should be kept at a moisture content of                 to avoid issues with rot, decay, shrinkage once the building is completed.
  1. 5%-10%
  2. 10%-15%
  3. 15%-20%
  4. 20%-25%
Continuing Education Concrete Forming and Placing Tools
What tool is used to create a textured finish on a concrete slab?
  1. Texturizer
  2. Power float
  3. Broom
  4. Rake
Continuing Education Baking Skills

This question is a part of a group with common instructions. View group »

Yeast cells thrive on                .
  1. simple sugars
  2. cold water
  3. bacteria
  4. salt
None Floor Framing
These framing members span from a wall to a wall or a beam to a beam. These members make up the majority of the floor system and support the floor sheathing.
  1. Ridge
  2. Trusses
  3. Beams
  4. Joists
None Wall Framing
The top plate of a wall is generally doubled. What is the main reason for this?
  1. Transfer the weight load between studs
  2. Easier for the nails to grab
  3. Ensure the windows don't sag
  4. Ensure it is straight
None Blueprints and Blueprint Reading
When ordering materials for a hand cut roof constructed of rafters and a ridge beam, where would you find the requirements for which size of dimensional lumber to use?
  1. Building by law
  2. Structural Engineer drawings
  3. Architectural drawings
  4. Cross section
None Roof Framing
A hip roof has a total area of 1,265 sq ft. How many 4 x 8 sheaths of plywood are required to cover this roof? Add a 15% waste factor and round up to the nearest whole number.
  1. 39
  2. 40
  3. 46
  4. 48
None Power Tools
Identify the tool in the image.
Carpentry Tools - Cordless Drill
  1. Cordless drill
  2. Hand drill
  3. Power drill
  4. Impact drill
None Screws, Nails, and Fasteners
Which type of nail is generally used in wood frame construction?
  1. Common
  2. Duplex
  3. Casing
  4. Ardox
Continuing Education Building Materials
Which of the following soft woods would be least efficient in exterior uses?
  1. Cedar
  2. Redwood
  3. Cypress
  4. Pine
Continuing Education Doors and Door Frames
The top jamb of the door is called the                 jamb.
  1. top
  2. door
  3. head
  4. large
Grade 10 Kitchen Equipment and Tools
What is the area set up in a kitchen for the easiest access to work stations called?
  1. The kitchen square
  2. The kitchen circle
  3. The kitchen triangle
  4. The kitchen octagon
None Layout Tools
What tool is often used in place of optical levels on a job site? It can be set up quickly and often needs only one operator.
  1. Transit level
  2. Laser level
  3. Builders level
  4. Site level
Continuing Education Meal Planning
The three main groups of carbohydrates are                                                   .
  1. fats, proteins, and minerals
  2. glucose, fructose, and galactose
  3. monosaccharides, disaccharides, and polysaccharides
  4. sucrose, cellulose, and glycogen
None Tool Safety
To prevent and avoid injuries the employee is responsible for wearing the correct personal protective                .
  1. glasses
  2. helmet
  3. gear
  4. equipment
Continuing Education Meal Planning
What is a Food Recovery Program?
  1. composting scrap food
  2. grocery stores that donate excess food
  3. recipe bank for cooking with leftovers
  4. restaurants buy older food at discount prices
Previous Page 29 of 349 Next
You need to have at least 5 reputation to vote a question down. Learn How To Earn Badges.