Want to see correct answers?
Login or join for free!
  printable Worksheets
Looking for printable worksheets?
Check out our pre-made printable worksheets!
Share/Like This Page

Other Questions - All Grades

You can create printable tests and worksheets from these Other questions! Select one or more questions using the checkboxes above each question. Then click the add selected questions to a test button before moving to another page.

Previous Page 9 of 349 Next
None Tool Safety
When using tools regularly, the carpenter is responsible to ensure they are                 properly which increase longevity of the tool and prevents injuries.
  1. maintained
  2. upkept
  3. looked after
  4. cleaned
None Screws, Nails, and Fasteners
When wood glue is applied to a joint, if done correctly the connection can be stronger than the wood itself.
  1. True
  2. False
Continuing Education Welding and Metal Fabrication
A problem that often occers when cutting with oxyfules is a loud snapping or popping sound that generally blows out the flame. This is called                
  1. back fire
  2. spit fire
  3. flash back
  4. snap fire
Grade 10 Culinary Math
When scaling a recipe up from four servings to seventeen servings, the scaled up measure of the original 1/4 cup (60 ml) cocoa will be                           2 cups + 1 tsp (255 ml)                           of cocoa.
Continuing Education Kitchen Safety and Sanitation
The best way to avoid getting your fingers caught in a mixer is to                                                        .
  1. turn the beaters away from you when removing them.
  2. turn the beaters toward you when removing them.
  3. remove the beaters as soon as you turn off the mixer.
  4. remove the beaters after unplugging the electric mixer.
Grade 11 Kitchen Safety and Sanitation
Salmonella can be found in poultry, raw meats, milk and other dairy products.
  1. True
  2. False
Grade 9 Kitchen Safety and Sanitation
The best way to thaw Frozen food should be in the                        
  1. Sink
  2. Oven
  3. Refrigerator
  4. Pan it will be cooked in
Continuing Education Hand Tools
If you are having difficulty pulling a nail from a piece of material, what is the most efficient way to increase the leverage of the hammer you are using?
  1. Add a block under the hammer
  2. Add a pipe to the end of the hammer
  3. Use a different hammer
  4. Drive the nail in until it protrudes to the other side
Grade 10 Culinary Skills
Food science is the study of how food and cooking work.
  1. True
  2. False
Continuing Education Problem Solving
New drywall is installed on existing studs in a building. There are numerous nail pops happening one month after the installation. What is the most common cause of this?
  1. Studs should have been removed and reinstalled new ones
  2. Wrong drywall was used
  3. Wood was wet when drywall was installed
  4. Drywall was not installed tight to the studs
Continuing Education Kitchen Safety and Sanitation
Identify the safest way to defrost meat.
  1. on the bottom shelf of the refrigerator
  2. in warm water in the sink
  3. on the top shelf of the refrigerator
  4. on the counter overnight
Continuing Education Types of Wall and Ceiling Finishes
Suspended ceiling panels have minimal options for panel types and finishes.
  1. True
  2. False
Continuing Education Culinary Math
The recipe calls for 3 1/2 cups of milk. You want to reduce the yield of the recipe by half. How much milk will you need?               1 3/4 cups               
Continuing Education Welding and Metal Fabrication
Preheat is used to get the metal hot so that you can cut it.
  1. True
  2. False
Continuing Education Estimating Framing Materials
There is an exterior wall that measures 37' 4" x 8' 2" tall. It needs to be sheathed with 2' x 8' sheaths of rigid insulation. How many sheaths do you need? Assume a 10% waste factor and round up to the nearest sheath.
  1. 18
  2. 19
  3. 20
  4. 21
Continuing Education Stair Framing
You are required to build a set of straight stairs. The total rise for the stairs is 8' 4 3/4". How many risers will there be if your unit rise is 7 3/4"?
  1. 11
  2. 12
  3. 13
  4. 14
Continuing Education Kitchen Safety and Sanitation
Which tool is safe to use when stirring hot liquids in a pot or pan on the stove top?
  1. metal whisk
  2. wooden spoon
  3. metal serving spoon
  4. rubber spatula
Continuing Education Culinary Skills
To cut into small squares.
  1. Mince
  2. Dice
  3. Cube
  4. Julienne
Continuing Education Surveying and Plot Plans
A contour line identifies the
  1. size of the land.
  2. slope and elevations of the land.
  3. direction of the land.
  4. direction of the water flow on the land.
Continuing Education Baking Skills
To combine ingredients until soft and creamy using a spoon, beater, or mixer.
  1. Cream
  2. Stir
Previous Page 9 of 349 Next
You need to have at least 5 reputation to vote a question down. Learn How To Earn Badges.