Want to see correct answers?
Login or join for free!
  printable Worksheets
Looking for printable worksheets?
Check out our pre-made printable worksheets!
Share/Like This Page
Filter By Grade

You are browsing Grade 9 questions. View questions in All Grades.

Grade 9 Grade 11 Continuing Education

Browse Questions

Ninth Grade (Grade 9) Welding and Metal Fabrication Questions

You can create printable tests and worksheets from these Grade 9 Welding and Metal Fabrication questions! Select one or more questions using the checkboxes above each question. Then click the add selected questions to a test button before moving to another page.

Previous Page 2 of 2 Next
Grade 9 Welding and Metal Fabrication
Izod testing is destructive testing
  1. True
  2. False
Grade 9 Welding and Metal Fabrication
Depth of the weld, penetration of joint is less than needed                            
  1. incomplete fusion
  2. arc strikes
  3. inadequate joint penatration
  4. undercut
Grade 9 Welding and Metal Fabrication
What is used to reduce the rate at which welds cool?
  1. Preheating
  2. Annealing
  3. Normalizing
Grade 9 Welding and Metal Fabrication
Impact testing is used to determine impact capability of a weld
  1. True
  2. False
Grade 9 Welding and Metal Fabrication
Tempering is the process of reheating a part that has been hardened through heating and quenched.
  1. True
  2. False
Grade 9 Welding and Metal Fabrication
The slower the metal cools; the greater the quenching effects
  1. True
  2. False
Grade 9 Welding and Metal Fabrication
VT stands for Visual Testing
  1. True
  2. False
Grade 9 Welding and Metal Fabrication
Latent Heat: heat required to change matter from one state to another and does not result in temperature change
  1. True
  2. False
Grade 9 Welding and Metal Fabrication
This inspection detects flaws by taking a picture.
  1. magnetic particle
  2. visual testing
  3. radio graphic
  4. penetrate
Grade 9 Welding and Metal Fabrication
Heat is classified into 3 forms
  1. True
  2. False
Grade 9 Welding and Metal Fabrication
The US unit of measure for heat is British Thermal Unit
  1. True
  2. False
Grade 9 Welding and Metal Fabrication
The most common etching solution is hydroelectric power
  1. True
  2. False
Grade 9 Welding and Metal Fabrication
The 2 purposes of etching are to determine soundness and location.
  1. True
  2. False
Grade 9 Welding and Metal Fabrication
Sensible Heat - Heat required to change matter from one state to another and does not result in temperature change
  1. True
  2. False
Previous Page 2 of 2 Next