Share/Like This Page
Print Instructions

NOTE: Only your test content will print.
To preview this test, click on the File menu and select Print Preview.




See our guide on How To Change Browser Print Settings to customize headers and footers before printing.

Identifying Power Tools (Continuing Education)

Print Test (Only the test content will print)
Name: Date:

Identifying Power Tools

1. 
Identify the tool in the image.
Carpentry Tools - Cordless Drill
  1. Cordless drill
  2. Hand drill
  3. Power drill
  4. Impact drill
 
2. 
Identify the tool in the image.
Carpentry Tools - Jigsaw
  1. Jig saw
  2. Reciprocating saw
  3. Circular saw
  4. Plunge saw
3. 
Identify the tool in the image.
Carpentry Tools - Hammer Drill
  1. Power drill
  2. Hammer drill
  3. Masonry drill
  4. Lock drill
 
4. 
Identify the tool in the image.
Carpentry Tools - SDS Drill
  1. Power drill
  2. Hammer drill
  3. Hand drill
  4. Impact drill
5. 
Identify the tool in the image.
Carpentry Tools - Auger Bit
  1. Auger drill bit
  2. Drill bit
  3. Spade drill bit
  4. Twist drill bit
 
6. 
Identify the tool in the image.
Carpentry Tools - Angle Grinder
  1. Grinder
  2. Cut off saw
  3. Hand grinder
  4. Rotating saw
7. 
Identify the tool in the image.
Carpentry Tools - Circular Saw
  1. Hand saw
  2. Chop saw
  3. Skill saw
  4. Circular saw
 
8. 
Identify the tool in the image.
Carpentry Tools - Paint Sprayer
  1. Applying gun
  2. Power mixer
  3. Corded drill
  4. Paint sprayer
9. 
When cutting an angle on a long rafter what saw is generally used by house framers?
  1. Circular saw
  2. Band saw
  3. Cross cut saw
  4. Table saw
 
10. 
When using a table saw or jointer it is recommended to use a push stick for what reason?
  1. To add additional pressure to the material
  2. Avoid having your fingers near the blade
  3. It is the only way the tool works
  4. Prevents kickback
11. 
When using a sander that sands in a back and forth motion you would be using a                                sander.
 
12. 
What term is used when a saw has more torque that a standard saw?
  1. Worm drive
  2. High torque
  3. Power saw
  4. Worm Gear
13. 
What safety feature can be found on most types of power saws?
  1. Adjustment plate
  2. Baseplate
  3. Guard
  4. Ground fault circuit interuptor
 
14. 
What type of portable power saw has a blade that has a straight back and forth cutting action and is often used for demolition of existing materials?
  1. Router Saw
  2. Circular Saw
  3. Panel Saw
  4. Reciprocating Saw
15. 
Which of the following grit of sandpaper would you use to remove large imperfections from a piece of wood?
  1. 60
  2. 160
  3. 180
  4. 400
 
16. 
Which of the following sandpaper grit would give you the smoothest finish?
  1. 60
  2. 160
  3. 250
  4. 400
17. 
What type of sander is aggressive and rotates a                 of varying grits. This type of sander is called a                 sander.
  1. belt
  2. oscillating
  3. palm
  4. orbital
 
18. 
When using a sander to remove large imperfections and it is rotating quickly you would be using a                sander. These types of sander's tend to remove material quickly.
19. 
When cutting the inside of an opening with a router what is the correct direction of travel?
  1. Does not matter
  2. Counter clockwise
  3. Clockwise
  4. Depends on the bit selection
 
20. 
A belt sander can only be handheld.
  1. True
  2. False
21. 
Sandpaper grit is rated with a number. The higher number the smoother the finish.
  1. True
  2. False
 
22. 
When using an oscillating sander what is the recommended motion?
  1. Small circles
  2. Side to side
  3. Long circular motion
  4. Up and down
23. 
When cutting floor joists to length, what is the best saw to use?
  1. Crosscut saw
  2. Ripping saw
  3. Coping saw
  4. Panel saw
 
24. 
What type of saw has a straight up and down cutting action?
  1. Coping Saw
  2. Jig saw
  3. Recipricating Saw
  4. Skill saw
25. 
Which of the following sandpaper grits is most coarse?
  1. 300
  2. 80
  3. 120
  4. 40
 
26. 
Which of the following sandpaper is the finest?
  1. 120
  2. 100
  3. 80
  4. 60
27. 
When sanding a piece of wood and you want an extremely smooth finish you would need to use sandpaper with a                number of grit.
 
28. 
When you need a sander that sands in a circular motion you would use a                      sander.
29. 
When you need to do a plunge cut with a circular saw, what needs to be done to one of the safety devices on the tools?
  1. Press the safety on trigger
  2. Wear safety glasses
  3. Ensure the GFCI is connected
  4. Pull the guard back
 
30. 
Tools powered by compressed air are referred to as                          tools.
You need to be a HelpTeaching.com member to access free printables.
Already a member? Log in for access.    |    Go Back To Previous Page