Share/Like This Page
Print Instructions

NOTE: Only your test content will print.
To preview this test, click on the File menu and select Print Preview.




See our guide on How To Change Browser Print Settings to customize headers and footers before printing.

Identify Proper Tool use (Continuing Education)

Print Test (Only the test content will print)
Name: Date:

Identify Proper Tool use

1. 
You need to cut out a piece of lumber from a wall assembly. There is chances that the wood has nails in it, and the wood does not need to be cut straight. What is the best tool to get this job done?
  1. Reciprocating saw
  2. Circular saw
  3. Hand saw
  4. Jig saw
2. 
When cutting a piece of drywall to fit in place, what tool is used to score the drywall?
  1. Hand saw
  2. Drywall saw
  3. Utility knife
  4. Swiss army knife
3. 
You need to cut a mitre and angle on a jack rafter. You are using 2x12 SPF as material. What is the best tool to use?
  1. Circular saw
  2. Band saw
  3. Table saw
  4. Mitre saw
4. 
When cutting an circle into a cabinet made of 5/8" MDF what is the best tool to use?
  1. Jig saw
  2. Recipricating saw
  3. Skill saw
  4. Utility knife
5. 
When cutting rafter material that may have knots, why might a worm drive skill saw work better than a regular circular saw?



6. 
When cutting a circle for a retrofitted pot light into a drywall ceiling what is the most efficient and easiest tool to cut this hole?
  1. Hole saw
  2. Utility knife
  3. Circular saw
  4. Drywall saw
7. 
When cutting a full 4' x 8' sheet of plywood into a strips 12" wide what is the best tool to use?
  1. Table saw
  2. Jig saw
  3. Recipricating saw
  4. Hand saw
8. 
What tool would you use to remove the material for a hinge gain in a door?
  1. Hand saw
  2. Chisel
  3. Circular saw
  4. Utility knife
9. 
To remove imperfections in the edge of a door what is the best tool to use?
  1. Plane
  2. Chisel
  3. Recipricating saw
  4. Utility knife
10. 
What is the main difference a pull saw has in comparison to a hand saw?



11. 
Describe how a coping saw would be used when installing baseboard?



12. 
You need to drill multiple holes of the exact same depth in a piece of material. What is the best tool to use?
  1. Drill
  2. Hand drill
  3. Drill press
  4. Hole saw
13. 
Often times a bench grinder is installed in a wood shop. What is it used for?
  1. Sharpen chisels
  2. Remove rust from tools
  3. Sharpen blades
  4. All of the above
14. 
What tool is used to create holes in masonry or concrete?
  1. Powder actuated nailer
  2. Hammer drill
  3. Power drill
  4. Concrete nailer
15. 
When installing gypsum wall board a screw gun is used. What is the main difference a screw gun has compared to a regular power drill?



16. 
What tool is used to create different shapes along the edge of a piece of material? It has numerous attachments for cutting curves or designs.
  1. Jig saw
  2. Power drill
  3. Router
  4. Power planer
17. 
A piece of wood material you plan on using has large imperfections. What tool is best used to remove the imperfections in the piece of wood?
  1. Palm sander
  2. Orbital sander
  3. Belt sander
  4. Table top sander
18. 
When a tool uses compressed air to operate it is referred to as a                            tool.
19. 
You need to fasten a 2x6 piece of lumber into a steel beam. What is the recommended tool for this?
  1. Framing nailer
  2. Powder actuated nailer
  3. Palm nailer
  4. Concrete nailer
20. 
Describe some features a framing hammer has that make it a more effective tool for house framing.




You need to be a HelpTeaching.com member to access free printables.
Already a member? Log in for access.    |    Go Back To Previous Page