Share/Like This Page
Print Instructions

NOTE: Only your test content will print.
To preview this test, click on the File menu and select Print Preview.




See our guide on How To Change Browser Print Settings to customize headers and footers before printing.

Blueprint Test (Continuing Education)

Print Test (Only the test content will print)
Name: Date:

Blueprint Test

1. 
When ordering materials for a hand cut roof constructed of rafters and a ridge beam, where would you find the requirements for which size of dimensional lumber to use?
  1. Building by law
  2. Structural Engineer drawings
  3. Architectural drawings
  4. Cross section
2. 
On a blueprint drawing, what would the lines in which measurements are referenced to be called?
  1. Contour lines
  2. Reference lines
  3. Grid lines
  4. Drawing lines
3. 
When determining how many pot lights are in a room what blue print would you refer too?
  1. Architectural
  2. Structural
  3. Mechanical
  4. Electrical
4. 
Where on a set of blueprints would you find the required window sizes?
  1. Window schedule
  2. Window plan
  3. Elevation plan
  4. Architectural plan
5. 
What type of drawing view is identified as an aerial view of the entire property?
  1. Site plan
  2. Floor plan
  3. Cross section
  4. Elevation
6. 
In a set of architectural plans the door and window sizes can be found on a door and window                       . It described the types, sizes, and location of the windows and doors on the project
7. 
Describe a cross section drawing view?



8. 
Which drawing would you refer too when determining how to fasten the sill plate to foundation wall?
  1. Detail
  2. Floor plan
  3. Cross section
  4. Elevation
9. 
On which blueprint would you find the setbacks as to how far a house is meant to be built from the property line?
  1. Site plan
  2. Floor plan
  3. Landscape plan
  4. Architectural plan
10. 
Which of the following blueprint views is drawn as if you were looking at the face of the building?
  1. Elevation
  2. Floor plan
  3. Cross section
  4. Detail
11. 
An isometric drawing is drawn with lines offset from square by                 degrees
  1. 30
  2. 35
  3. 40
  4. 45
12. 
In which blueprint would you find the specifications for the type of siding that is used on a building?
  1. Architectural
  2. Structural
  3. Mechanical
  4. Electrical
13. 
Which of the following is blueprint views is drawn as if you were looking down from the top of a building?
  1. Cross section
  2. Plot plan
  3. Floor plan
  4. Site plan
14. 
In which blueprint would you find specifications on what type of floor joists to use?
  1. Architectural
  2. Structural
  3. Mechanical
  4. Electrical
15. 
In which blueprint would you find specifications about the plumbing?
  1. Architectural
  2. Structural
  3. Mechanical
  4. Electrical
You need to be a HelpTeaching.com member to access free printables.
Already a member? Log in for access.    |    Go Back To Previous Page