Want to see correct answers?
Login or join for free!
  printable Worksheets
Looking for printable worksheets?
Check out our pre-made printable worksheets!
Share/Like This Page
Filter By Grade

You are browsing None questions. View questions in All Grades.

Continuing Education

Browse Questions

None Concrete Forming and Placing Questions

You can create printable tests and worksheets from these None Concrete Forming and Placing questions! Select one or more questions using the checkboxes above each question. Then click the add selected questions to a test button before moving to another page.

Previous Page 1 of 4 Next
None Concrete Forming Systems and Techniques
Footings of a foundation wall are considered flatwork. How wide are the footings in comparison to the foundation wall?
  1. twice the wall thickness
  2. same as the wall thickness
  3. three times the wall thickness
  4. does not matter how thick they are
None Concrete Forming Systems and Techniques
What is it called when a footing is poured directly into the soil with no footing?
  1. Free pour
  2. Rough pour
  3. Trench pour
  4. Easy pour
None Concrete Forming Systems and Techniques
What makes forming a set of suspended stairs more difficult?
  1. No additional support is needed
  2. A form needs to be built on the underside of the stairs
  3. You need to use large lumber
  4. The plywood needs to be thicker
None Concrete Forming Systems and Techniques
What are driven into the ground and used to hold flat work forms and footings in place?
  1. nails
  2. level
  3. metal
  4. stakes
None Concrete Placement
What would you need to add if you were required to build a suspended set of concrete stairs instead of earth supported?
  1. Additional rebar
  2. Additional concrete
  3. Additional large rocks
  4. Additonal water to the mix
None Concrete Forming Systems and Techniques
What is done to the bottom side of a concrete stair riser form to allow for proper concrete finishing?
  1. A line is cut in it
  2. Less nails are used
  3. A bevel is cut on the bottom
  4. A bevel is cut on the top
None Concrete Forming Systems and Techniques
The term CMU refers to the concrete blocks that are often used to build foundation walls. What does the abbreviation CMU stand for?
  1. Certified Masonry Unit
  2. Concrete Masonry Unit
  3. Complete Mason Unit
  4. Concrete Mason Unit
None Concrete Placement
What is the name given to a product that is added to concrete to resist fungus growth, or slow setting time?
  1. Concrete addition
  2. Aggregate
  3. Admixture
  4. Cement resistor
None Concrete Placement
Concrete strength is measured in                       .
  1. Pounds per inch
  2. Pounds per square inch
  3. Pounds per yard
  4. Pounds per meter
None Concrete Placement
What is done to concrete to lengthen the curing time?
  1. Place concrete quickly with less water
  2. Add more water during concrete placement
  3. Add heaters after placing
  4. Keep concrete hydrated after placing
None Concrete Forming Systems and Techniques
Which of the following is NOT a typical residential concrete foundation type?
  1. Slab on grade foundation
  2. Above grade foundation
  3. Crawl space foundation
  4. Full basement foundation
Previous Page 1 of 4 Next