Want to see correct answers?
Login or join for free!
  printable Worksheets
Looking for printable worksheets?
Check out our pre-made printable worksheets!
Share/Like This Page
Filter By Grade

You are browsing None questions. View questions in All Grades.

Grade 9 Grade 10 Grade 11 Grade 12 College Continuing Education

None Carpentry Questions

You can create printable tests and worksheets from these None Carpentry questions! Select one or more questions using the checkboxes above each question. Then click the add selected questions to a test button before moving to another page.

Previous Page 12 of 39 Next
None Roofing
When referencing roofing materials, what does the term "square" describe?
  1. Amount of roofing required to cover 1 sq ft
  2. Amount of roofing required to cover 10 sq ft
  3. Amount of roofing required to cover 100 sq ft
  4. Amount of roofing required to cover 1000 sq ft
None Power Tools
None Interior Stairs and Railings
Which of the following statements is true when describing open stairs?
  1. Built with a hand rail on one side only
  2. Do not have a door on the top or bottom of the stair
  3. Are constructed with no riser material
  4. One side is open to a hallway
None Concrete Placement
Concrete strength is measured in                       .
  1. Pounds per inch
  2. Pounds per square inch
  3. Pounds per yard
  4. Pounds per meter
None Stair Framing
What is one of the most common stair proportioning formulas to help carpenters create a comfortable and safe set of steps?
  1. Rise + run = 25 degrees
  2. Rise + run = 18"
  3. Rise and run = 45 degrees
  4. Rise + run = 17"
None Screws, Nails, and Fasteners
What is the name of the sharp point of a screw?
  1. Driving point
  2. Gimlet point
  3. Fastening point
  4. Screw point
None Wall Framing
When wood framing a house, what would be considered good practice for the top plate of the bearing partition?
  1. Ensure minimal weight is added on the wall
  2. Ensure it butts into exterior wall
  3. Add extra nails
  4. Lap the plate of the exterior wall
None Power Tools
When using an oscillating sander what is the recommended motion?
  1. Small circles
  2. Side to side
  3. Long circular motion
  4. Up and down
Previous Page 12 of 39 Next
You need to have at least 5 reputation to vote a question down. Learn How To Earn Badges.