Want to see correct answers?
Login or join for free!
  printable Worksheets
Looking for printable worksheets?
Check out our pre-made printable worksheets!
Share/Like This Page
Filter By Grade

You are browsing None questions. View questions in All Grades.

Grade 9 Grade 10 Grade 11 Grade 12 College Continuing Education

Browse Questions

None Carpentry Questions

You can create printable tests and worksheets from these None Carpentry questions! Select one or more questions using the checkboxes above each question. Then click the add selected questions to a test button before moving to another page.

Previous Page 5 of 39 Next
None Roof Framing
What do you need to know when determining the rafter span of a roof?
  1. roof slope
  2. on-center spacing
  3. snow load
  4. building width
None Power Tools
Electric compressors should be plugged directly into the power source whenever possible because
  1. they have small cords.
  2. are loud and should be as far away from workers as possible.
  3. are very heavy and difficult to lift into place.
  4. they require a lot of power.
None Building Materials
What are the primary uses for PSL lumber?
  1. Beams and posts
  2. Walls and ceilings
  3. Floors and sheathing
  4. Rafters and studs
None Power Tools
Identify the tool in the image.
Carpentry Tools - Angle Grinder
  1. Grinder
  2. Cut off saw
  3. Hand grinder
  4. Rotating saw
None Hand Tools
Identify the tool in the image.
Carpentry Tools - Tape Measure
  1. Tape measure
  2. Long tape
  3. Combination measure
  4. Pocket measure
None Tool Safety
What is one way to ensure a hand tool does not injure the user when it is being used?
  1. Make sure they are clean
  2. Proper maintenance
  3. Leave unplugged if not in use
  4. Don't use them
None Concrete Forming Systems and Techniques
What are driven into the ground and used to hold flat work forms and footings in place?
  1. nails
  2. level
  3. metal
  4. stakes
None Exterior Installation Techniques and Terminology
What makes cedar a great choice for exterior siding?
  1. Naturally water repellant
  2. Naturally insect repellant
  3. Naturally mold resistant
  4. All of the above
None Tool Safety
What must be worn when operating an abrasive wheel tool such as a grinder or cut off tool?
  1. Face protection
  2. Eye protection
  3. Steel toe shoes/boots
  4. Rubber soled shoes/boots
None Hand Tools
Identify the tool in the image.
Carpentry Tools - Philips Head Screw Driver
  1. Philips screwdriver
  2. Robertson screw driver
  3. Flat head screw driver
  4. Hex head screw driver
None Concrete Placement
What would you need to add if you were required to build a suspended set of concrete stairs instead of earth supported?
  1. Additional rebar
  2. Additional concrete
  3. Additional large rocks
  4. Additonal water to the mix
Previous Page 5 of 39 Next