Want to see correct answers?
Login or join for free!
  printable Worksheets
Looking for printable worksheets?
Check out our pre-made printable worksheets!
Share/Like This Page

None Other Questions

You can create printable tests and worksheets from these None Other questions! Select one or more questions using the checkboxes above each question. Then click the add selected questions to a test button before moving to another page.

Previous Page 3 of 49 Next
None Power Tools
What type of portable power saw has a blade that has a straight back and forth cutting action and is often used for demolition of existing materials?
  1. Router Saw
  2. Circular Saw
  3. Panel Saw
  4. Reciprocating Saw
None Hand Tools
If you needed to quickly check framing members of a house to see that they are accurate both horizontally, or vertically, what would be the best tool to do this?
  1. Framing square
  2. Builders level
  3. Plumb bob
  4. Hand level
None Power Tools
What safety feature can be found on most types of power saws?
  1. Adjustment plate
  2. Baseplate
  3. Guard
  4. Ground fault circuit interuptor
None Screws, Nails, and Fasteners
What is an anchor?
  1. The insulation in the wall
  2. The roof being held down solid to the house
  3. A type of fastener to attach components to walls or ceilings
  4. A special kind of footing
None Wall Framing
A lintel is used to span window and door openings in wood frame construction.
  1. True
  2. False
None Roof Framing
To determine the projection of a roof rafter you need to take the                 measurement of the end of the rafter tail to the outside face of the building.
  1. angle
  2. horizantal
  3. vertical
  4. level
None Hand Tools
This tool is used to cut into gypsum and has a specialized blade for quickly and easily cutting into drywall.
  1. Power saw
  2. Exacto knife
  3. Jig saw
  4. Wallboard saw
None Power Tools
When you need to do a plunge cut with a circular saw, what needs to be done to one of the safety devices on the tools?
  1. Press the safety on trigger
  2. Wear safety glasses
  3. Ensure the GFCI is connected
  4. Pull the guard back
None Tool Safety
What is the correct ladder ratio required to safely set up an extension ladder?
  1. 1:2
  2. 1:3
  3. 1:4
  4. 1:5
None Tool Safety
What is one way a user can be injured when using a hand tool?
  1. Electric shock
  2. Improper use
  3. Can't be injured
  4. Wearing gloves
None Roof Framing
A roof truss is made up of a rafter, ceiling joist and                . A truss is built of dimensional lumber and assembled away from the job site.
  1. lumer
  2. posts
  3. web
  4. stud
None Roof Framing
A roof needs a be a hip roof, or a gable roof, and you cannot build a roof that is the combination of the two types.
  1. True
  2. False
None Wall Framing
A wood framed wall consists of studs,                 and lintels.
  1. plates
  2. trimmers
  3. risers
  4. beams
None Power Tools
Which of the following sandpaper grit would give you the smoothest finish?
  1. 60
  2. 160
  3. 250
  4. 400
None Power Tools
When using a table saw or jointer it is recommended to use a push stick for what reason?
  1. To add additional pressure to the material
  2. Avoid having your fingers near the blade
  3. It is the only way the tool works
  4. Prevents kickback
None Concrete Forming Systems and Techniques
Footings of a foundation wall are considered flatwork. How wide are the footings in comparison to the foundation wall?
  1. twice the wall thickness
  2. same as the wall thickness
  3. three times the wall thickness
  4. does not matter how thick they are
None Screws, Nails, and Fasteners
What is the best type of adhesive to use when a moisture and uv resistant is required?
  1. Construction adhesive
  2. Urethane glue
  3. Regular wood glue
  4. Contact cement
None Tool Safety
Improper maintenance and misuse of hand tools are two ways users can be injured when using these tools.
  1. True
  2. False
None Power Tools
Identify the tool in the image.
Carpentry Tools - Circular Saw
  1. Hand saw
  2. Chop saw
  3. Skill saw
  4. Circular saw
None Floor Framing
What is the name of the framing member that is added to spaces of the floor system to prevent the joists from twisting and bending? They tie the entire floor system into one.
  1. Backing
  2. Bridging
  3. Bracing
  4. Sheathing
Previous Page 3 of 49 Next