Want to see correct answers?
Login or join for free!
  printable Worksheets
Looking for printable worksheets?
Check out our pre-made printable worksheets!
Share/Like This Page

Occupational Safety (OSHA) Questions - All Grades

You can create printable tests and worksheets from these Occupational Safety (OSHA) questions! Select one or more questions using the checkboxes above each question. Then click the add selected questions to a test button before moving to another page.

Previous Page 1 of 3 Next
Continuing Education Occupational Safety (OSHA)
Diamond shaped signs indicate:
  1. warning signs
  2. stop signs
  3. railroad crossings
  4. safety hazards
Grade 9 Occupational Safety (OSHA)
All of the following are appropriate footwear for Technical rope work except:
  1. Heavy mountaineering boots
  2. Structural firefighting boots
  3. Vibram-soled, lightweight hiking boots
  4. Heavyweight leather hiking boots
Grade 8 Occupational Safety (OSHA)
A helmet in the high angle environment does all of the following except:
  1. Decrease the risk of significant skull fracture
  2. Decrease the risk of severe brain injury
  3. Decrease the risk of accidents
  4. Protects from falling objects
Grade 10 Occupational Safety (OSHA)
A convenient place to store rigging hardware while rigging for a rescue is:
  1. On your seat harness
  2. On the litter
  3. In your pack
  4. On the ground at the site
Grade 11 Occupational Safety (OSHA)
Pulleys may serve all the following functions except:
  1. Changing direction
  2. Working a mechanical advantage system
  3. Reducing abrasion on rope
  4. Acting as a belay device
Grade 10 Occupational Safety (OSHA)
The advantages of bagging rope rather than coiling it include all of the flollowing except:
  1. Bagging can be accomplished quicker than coiling
  2. Bagged rope is more convenient to carry
  3. Bagged rope is easier to deploy
  4. Bagging protects the rope from heat damage
Grade 8 Occupational Safety (OSHA)
Which is the highest level of operational capability in Technical Rope Rescue defined by the NFPA?
  1. Technician
  2. Awareness
  3. Specialist
  4. Operations
Grade 9 Occupational Safety (OSHA)
Which of the following may cause life-threatening complications if used as a single-point of suspension in the high-angle environment?
  1. Life belts
  2. Ladder belts
  3. Pompier belts
  4. Escape belts
  5. All the above
Grade 12 Occupational Safety (OSHA)
The typical breaking strength of 1 inch flat webbing is:
  1. 2500 lb (11.2 kN)
  2. 4000 lb (17.8 kN)
  3. 5000 lb (22.2 kN)
  4. 6000 lb (28.9 kN)
Grade 11 Occupational Safety (OSHA)
Static ropes are designed not to stretch because this type of rope construction:
  1. Reduces stretch in mechanical advantage
  2. Allows for energy absorption
  3. Allows the climber to absorb the kinetic energy
  4. Permits easier knot placement
Grade 8 Occupational Safety (OSHA)
This NFPA standard refers to training, reference the team.
  1. NFPA 1670
  2. NFPA 1006
  3. NFPA 1403
  4. NFPA 1521
Grade 12 Occupational Safety (OSHA)
Wearing gloves helps a person maintain control of the rope during a rope rescue because gloves:
  1. Protect the wearer from dirt and grime
  2. Limit feeling the heat of the rope
  3. Protect against burns and abrasions
  4. Improve the grip on materials
Grade 11 Occupational Safety (OSHA)
All of the following situations would require a rope attached to a seat harness except:
  1. Rapelling
  2. Attending a litter in high-angle terrain
  3. Entering the water during a swift water rescue
  4. Having a belay or a safety line close to a cliffs edge
Continuing Education Occupational Safety (OSHA)
What is the purpose of OSHA?
  1. Requiring the use of childproof caps for detergent.
  2. Ensure employers provide clean uniforms.
  3. Enusre employee safety and health.
  4. All the above.
Grade 8 Occupational Safety (OSHA)
A helmet for the technical rescuer should include which of the following:
  1. Chin strap
  2. Certification from appropriate agency
  3. Three-point suspension system
  4. All the above
Grade 10 Occupational Safety (OSHA)
Which of the following represents a situation in which the use of a knife might lead to disaster:
  1. Catching a T-shirt in a decent device
  2. Freeing the working rope of a fused prusik
  3. Cutting brush away from the edge during a rope operation
  4. All the above
Grade 10 Occupational Safety (OSHA)
Every rope rescue operation should have an Incident Safety Officer (ISO):
  1. True
  2. False
Grade 10 Occupational Safety (OSHA)
A U.S. organization involved in setting up standards for rope rescue equipment is:
  1. USIA
  2. NFPA
  3. IODA
  4. USDOT
Grade 8 Occupational Safety (OSHA)
Which is the highest level of operational capability in Technical Rope Rescue defined by the NFPA?
  1. Technician
  2. Awareness
  3. Specialist
  4. Operations
Grade 12 Occupational Safety (OSHA)
The term Kernmantle refers to:
  1. The core and sheath construction
  2. The solid braid over a single braid
  3. The eight bundles of fibers plaited together
  4. The three fiber bundles twisted together
Previous Page 1 of 3 Next
You need to have at least 5 reputation to vote a question down. Learn How To Earn Badges.