Want to see correct answers?
Login or join for free!
  printable Worksheets
Looking for printable worksheets?
Check out our pre-made printable worksheets!
Share/Like This Page
Filter By Grade

You are browsing None questions. View questions in All Grades.

Pre-K Grade 6 Grade 8 Grade 9 Grade 10 Grade 11 Grade 12 College Continuing Education

None Vocational Education Questions

You can create printable tests and worksheets from these None Vocational Education questions! Select one or more questions using the checkboxes above each question. Then click the add selected questions to a test button before moving to another page.

Previous Page 1 of 56 Next
None Tool Safety
According to Occupation Safety and Health Administration, what is recommended when you discover a tool has been damaged?
  1. Nothing is recommended by OSHA.
  2. Schedule to have it fixed and continue using.
  3. Use it carefully.
  4. Do not use the tool.
None Concrete Forming Systems and Techniques
What is done to the bottom side of a concrete stair riser form to allow for proper concrete finishing?
  1. A line is cut in it
  2. Less nails are used
  3. A bevel is cut on the bottom
  4. A bevel is cut on the top
None Concrete Forming Systems and Techniques
What makes forming a set of suspended stairs more difficult?
  1. No additional support is needed
  2. A form needs to be built on the underside of the stairs
  3. You need to use large lumber
  4. The plywood needs to be thicker
None Screws, Nails, and Fasteners
Why is construction adhesive added between floor sheathing and floor joists? It is also used for wood frame stair construction.
  1. Prevent squeeks
  2. Prevent nail pops
  3. Creates a more structurally sound floor system
  4. All of the above
None Screws, Nails, and Fasteners
Why is it important to use the correct adhesives on the materials they were intended for?
  1. Ensures a proper bond and no negative chemical reactions
  2. Ensure the colours match correctly
  3. Ensure the product does not off gas
  4. Ensures the person installing it does not get harmed
None Building Materials
What type of material is generally used during the manufacture of laminated veneer lumber?
  1. Fir and Pine
  2. Pine and Larch
  3. Hemlock and Fir
  4. Cedar and Fir
None Screws, Nails, and Fasteners
What tool is used to spread mastic when installing vinyl floor tiles?
  1. Notched trowel
  2. Un notched trowl
  3. Float
  4. Does not matter
None Screws, Nails, and Fasteners
What is the best type of adhesive to use when a moisture and uv resistant is required?
  1. Construction adhesive
  2. Urethane glue
  3. Regular wood glue
  4. Contact cement
None Screws, Nails, and Fasteners
What is generally referred to as glue, however is actually considered a mastic
  1. Yellow wood glue
  2. Tile adhesive
  3. Construction adhesive
  4. Urethane glue
None Building Materials
Where on a construction site would you find wood I joists?
  1. Floors and roofs
  2. Walls and ceilings
  3. Ceilings and floors
  4. Roofs and walls
None Building Materials
What are the primary uses for PSL lumber?
  1. Beams and posts
  2. Walls and ceilings
  3. Floors and sheathing
  4. Rafters and studs
None Exterior Installation Techniques and Terminology
What is the main benefit of installing tongue and groove siding?
  1. Hidden fasteners
  2. Easy to install
  3. Inexpensive
  4. All of the above
Previous Page 1 of 56 Next
You need to have at least 5 reputation to vote a question down. Learn How To Earn Badges.