Want to see correct answers?
Login or join for free!
  printable Worksheets
Looking for printable worksheets?
Check out our pre-made printable worksheets!
Share/Like This Page
Browse Questions

Carpentry Skills and Tools Questions - All Grades

You can create printable tests and worksheets from these Carpentry Skills and Tools questions! Select one or more questions using the checkboxes above each question. Then click the add selected questions to a test button before moving to another page.

Previous Page 1 of 21 Next
Continuing Education Hand Tools
Continuing Education Power Tools
Continuing Education Hand Tools
None Tool Safety
According to Occupation Safety and Health Administration, what is recommended when you discover a tool has been damaged?
  1. Nothing is recommended by OSHA.
  2. Schedule to have it fixed and continue using.
  3. Use it carefully.
  4. Do not use the tool.
Continuing Education Hand Tools
The term plumb refers to the                 .
  1. horizontal plane
  2. vertical plane
  3. both
  4. none
Continuing Education Hand Tools
None Screws, Nails, and Fasteners
Why is construction adhesive added between floor sheathing and floor joists? It is also used for wood frame stair construction.
  1. Prevent squeeks
  2. Prevent nail pops
  3. Creates a more structurally sound floor system
  4. All of the above
Continuing Education Hand Tools
When clamping material together, what is something that needs to be avoided to prevent damaging of material?
  1. Over clamping, which causes dents
  2. Using the wrong clamp
  3. Under clamping, which doesn't create a sufficient hold
  4. All of the above
Continuing Education Hand Tools
Continuing Education Hand Tools
If you are having difficulty pulling a nail from a piece of material, what is the most efficient way to increase the leverage of the hammer you are using?
  1. Add a block under the hammer
  2. Add a pipe to the end of the hammer
  3. Use a different hammer
  4. Drive the nail in until it protrudes to the other side
Continuing Education Hand Tools
When checking for plumb on a vertical stud that has a bowed edge, where is it recommended to place the level on the stud for the most accurate reading?
  1. On the top
  2. On the bottom
  3. Along one edge in the middle
  4. With a straight edge running from the top to bottom of the stud
Continuing Education Hand Tools
The term level refers to the                 .
  1. horizontal plane
  2. vertical plane
  3. both
  4. none
None Screws, Nails, and Fasteners
Why is it important to use the correct adhesives on the materials they were intended for?
  1. Ensures a proper bond and no negative chemical reactions
  2. Ensure the colours match correctly
  3. Ensure the product does not off gas
  4. Ensures the person installing it does not get harmed
None Screws, Nails, and Fasteners
What is generally referred to as glue, however is actually considered a mastic
  1. Yellow wood glue
  2. Tile adhesive
  3. Construction adhesive
  4. Urethane glue
None Screws, Nails, and Fasteners
What tool is used to spread mastic when installing vinyl floor tiles?
  1. Notched trowel
  2. Un notched trowl
  3. Float
  4. Does not matter
Previous Page 1 of 21 Next
You need to have at least 5 reputation to vote a question down. Learn How To Earn Badges.