Want to see correct answers?
Login or join for free!

Search Results for points - All Grades

3161 questions match "points". Refine Your Search

Select questions to add to a test using the checkbox above each question. Remember to click the add selected questions to a test button before moving to another page.

Previous Page 158 of 159 Next
Grade 11 Functions and Relations CCSS: HSF-LE.A.3
The following table shows some of the values of functions [math]f(x)[/math], which is linear, and [math]g(x)[/math], which is exponential. What can be concluded from these values (and general properties of these functions), and why?

[math] \ \ \ \ \ \ \ \ \ \ \ mathbf{x} \ \ \ \ \ \ \ \ \ \ \ [/math][math] \ \ \ \ \ \ \ \ \ \ \mathbf{f(x)} \ \ \ \ \ \ \ \ \ \ [/math][math] \ \ \ \ \ \ \ \ \ \ \mathbf{g(x)} \ \ \ \ \ \ \ \ \ \ [/math]
[math] 2 [/math][math] 23 [/math][math] 4 [/math]
[math] 3 [/math][math] 33 [/math][math] 8 [/math]
[math] 4 [/math][math] 43 [/math][math] 16 [/math]
[math] 5 [/math][math] 53 [/math][math] 32 [/math]
[math] 6 [/math][math] 63 [/math][math] 64 [/math]
[math] 7 [/math][math] 73 [/math][math] 128 [/math]
  1. [math]g(x) > f(x)[/math] for all values of [math]x[/math]. This is because [math]f(x)[/math] is an exponential function, which must always be greater than a linear function.
  2. [math]g(x)>f(x)[/math] for [math]x>=6[/math]. Since the values of [math]g(x)[/math] continue to increase by ever greater amounts each unit interval, they will continue to be greater than the values of [math]f(x)[/math] which are only increasing by the same amount each unit interval.
  3. [math]g(x) > f(x)[/math] for [math]6 <= x <= 45[/math]. If a linear function intersects an exponential function, it must do so twice. Therefore, the two functions will intersect again at approximately [math]x~~2^5.5 ~~ 45.3[/math], and thereafter [math]f(x) > g(x)[/math].
  4. [math]g(x) > f(x)[/math] for [math]x>=6[/math] and [math]g(x) < f(x)[/math] for [math]x <= 5[/math]. Since [math]x~~5.5[/math] is the only point of intersection, and given the values in the table, [math]g(x)[/math] must be greater than [math]f(x)[/math] for values of [math]x[/math] greater than or equal to 6 and it must be less than [math]f(x)[/math] for values of [math]x[/math] less than or equal to 5.
Grade 4 Magnetism and Electricity
A        thin        copper wire is more resistant to the flow of electricity than a        thick         copper wire.

When you add more batteries in parallel to a circuit containing one bulb, what happens                                         the bulbs brightness remains the same.                                         

It is easier to find a burned out bulb in a circuit that has bulbs connected in a           parallel            than in a circuit with bulbs connected in a series.

The flow of electricity through an object depends on the            material            the object is made of, the       size        of the object,and the             resistance              of the object.

Another name for nonconductor is            insulator             .

The element in an electric heater is made of           nichrome            wire.

A device for making or breaking a connection in a circuit is a            
switch.           


A           terminal            is a point on a battery or bulb that must be touched in order to make a circuit complete.

When a material limits the amount of electricity that can flow through it has              resistance.              

Most circuits in your home are connected in             parallel.            

The part of the bulb that gives off light is the             filament.            
Grade 11 Functions and Relations CCSS: HSF-LE.A.2

This question is a part of a group with common instructions. View group »

Given the information in the previous two questions and properties of both functions, choose which of the following statements is definitely true.
  1. [math]f(x) > p(x)[/math] for [math]x >= 2524[/math], since the steady percent increase of [math]f(x)[/math] means it will grow by ever greater amounts over a one unit interval. Although the amount that [math]p(x)[/math] increases over a one unit interval will also grow, it will do so more slowly.
  2. [math]f(x) > p(x)[/math] may be true for all values of [math]x[/math] greater than or equal to 2524, or it may only be greater for some interval before [math]p(x)[/math] becomes greater. Since the percent increase of [math]p(x)[/math] is always changing, it cannot be certain which function will be greater.
  3. [math]f(x) > p(x)[/math] for [math]2524 <= x < x_0[/math], where [math]x_0[/math] is some real value of [math]x[/math] greater than 2524. Because [math]f(x)[/math] is only increasing by 1% each unit interval, the amount it increases over a one unit interval will eventually slow down, and [math]p(x)[/math] will become larger.
  4. [math]f(x)[/math] will be equal to [math]p(x)[/math] for exactly one more value of x for [math]x > 2524[/math]. Let this point be [math]x_0[/math]. It cannot be determined with the information given which function will be greater for [math]x > x_0[/math].
Grade 6 Tectonics
1. Vibrations produced when rock breaks along a fault is a(n)              earthquake             .

2. The three types of                    plate boundaries                    are divergent, convergent, and transform.

3. All continents were once connected in a single large landmass that broke apart 200 million years ago. This is known as                     continental drift                    .

4. A                seismic wave                is generated by an earthquake.

5. This wave moves rock particles up and down in a backward rolling motion and side to side in a swaying motion.                surface wave               

6. A                     strike-slip fault                     causes breaks in rocks created when rocks move past each other without much vertical movement.

7. A               seismograph               is an instrument used to register earthquake waves and record the time that each arrived.

8. A                primary wave                moves rock particles back and forth in the same direction and is the first wave felt during an earthquake.

9. The measure of energy released during an earthquake is             magnitude            .

10. This is used most often to describe the strength of an earthquake.                 Richter Scale                

11. The theory that Earth's crust and upper mantle are broken into plates that float and move around.                   Plate Tectonics                  

12. The         focus         is the point below Earth's surface where energy is released in the form of seismic waves.

13. A         fault         is the surface along which rocks move when they pass their elastic limit and break.

14. The seismic wave that moves rock particles at right angles to the direction of the wave.
                 secondary wave                 

15. A break in the rock caused by compressive force where rocks above the fault surface move upward.
                reverse fault                

16. The             epicenter             is the point on Earth's surface directly above the earthquake focus.

17. This type of fault is when rock above the fault surface moves down relative to the rocks below the fault's surface.                normal fault               
Grade 7 Vocabulary CCSS: CCRA.L.6, L.7.6
The accountant kept a very sharp         point        on his pencil.

Our family enjoys a long        trek       through the woods.

A smile is considered a             universal            form of communication.

A white flag is a          symbol         of surrender.

Many countries hold elections to choose              government             leaders.

All new buildings require a ramp so entrance is              accessible             to wheelchairs.

Students who showed the most               originality              in the art contest, won the biggest awards.

The rules are in place to prevent         chaos        or confusion in class.

Many teachers are losing their            patience           with the horrible behavior.

One must be             bilingual             to land many jobs.

The more talents and abilities you possess, the higher your         income         will be.

Many people have          serial         blogs to which they contribute on a weekly basis.

The aerial show was designed to        stun       the audience watching the stunt pilots.

Some products from other countries cost much more than domestic products because of the          tariff          that is enforced to import them.

A runner has to build up           stamina           in order to run a marathon.
Grade 7 Summarizing CCSS: CCRA.R.2, RL.7.2
The Road Crew
by Bryan Ellett

Seth watched out the front window as a crew of about 10 people worked hard to destroy parts of the street in front of his house. There was a large sign down at the end of the street describing the construction project underway. It said, "Road Resurfacing. Expected completion: Fall 2009." The sign did not explain what Seth was watching out his front window. To Seth, it appeared that the destruction was somewhat random.
One man sat in the seat of a large piece of construction equipment that Seth's dad told him was called a backhoe. This giant piece of metal machinery had a scoop with jagged metal teeth at the end of a long arm, and the operator was controlling the arm and scoop with two joysticks. He would raise the arm high in the air, with the teeth of the scoop pointing downward. Then, he would bring the arm down quickly and with great force, using the teeth of the scoop to crush the concrete that it landed on. Already, this gentleman had ripped out the entire portion of sloped concrete that connected the driveway of Seth's house with the road. Several workers came along and hauled away the large pieces of concrete left behind.
Another worker was in charge of a large circular saw. He would wheel the saw to a particular piece of the road and fire it up. The spinning of the saw, even before it began cutting, created a high whining sound. Then, he would lower the saw into the concrete and cut long sections of the road. The piece of the road Seth watched him cut was about eight feet long and two feet wide. Seth could tell that the saw operator was working extremely hard.
Seth stepped into his front yard and looked up and down the street. Nothing made sense. Several other houses had the front portion of their driveway ripped out just as Seth's had been. But there were several more houses whose driveways were untouched. There were slices of road cut out here and there, but Seth could see no pattern to the places that were cut up. He could even see one worker filling in a recently cut piece of the roadway with fresh cement. Was there any point to what they were doing, or were they just breaking things and putting them back together to kill time? Seth had no way to know, so he just went back to the window to watch. It might not make sense, but, for Seth, destruction was fun to watch.

Which of these best summarizes the last paragraph?
  1. Seth noticed that one worker was filling in with concrete one of the holes that had been cut.
  2. Seth saw that some driveways were being ripped out while others were not being touched.
  3. Seth was happy to be watching workers from his window because he enjoyed watching destruction.
  4. Seth did not understand why only parts of the road were being destroyed, so he decided to just watch and enjoy.
Grade 7 Edgar Allen Poe CCSS: CCRA.L.2, L.7.2b
Using the word bank, fill in the word that best fits each definition.

1.the act of killing                 immolation (n)                 
2.to annoy or worry          vex (v)          
3.to completely surround or cover                enveloped (v)                
4.quality of being able to make hard decisions               sagacity (n)               
5.idea that you have, but can not prove                   suppositions (n)                   
6.measurement of wood and stone in a building                 scantlings (n)                 
7.acting in a relaxed or confident manner                suavity (adj)                
8.something that doesn't have value or importance              trifles (n)              
9.state of being laughed at               derision (n)               
10.manner of speaking                utterance (n)                
11.expert or judge                  connoisseur (n)                  
12.someone who does something in a skilled way               virtuoso (n)               
13.to go away or escape from a place secretly                absconded (v)                
14.watery discharge from the eyes or nose            rheum (n)            
15.difficult to deal with                  obstinate (adj)                  
16.act of making gestures                    gesticulation (n)                    
17.flaming torch                flambeaux (n)                
18.straight sword with narrow blade and sharp edges             rapier (n)             
19.pointed tool for working with stone                puncheons (n)                
20.large destructive fire; war or conflict                    conflagration (n)                    

Bonus Question: When and where did Poe die?                              October 9,1849 in Baltimore                              

Word Bank:
conflagrashun punchuns rapeyur flambow jestickulashun

obstineight room ubskonded virchewoso connissuer

utterants derishun trifells swavity skantlings

supposishuns sajasity envelupped vecks immolashun
Grade 8 Study Skills and Strategies
Memorizing information is part of school. At some point, you will need to memorize information like the meaning of vocabulary for a foreign language, countries on a map, or formulas of common chemical compounds. Although memorizing facts can seem overwhelming, don't panic! Look over the list below, select three of the memory strategies, and give them a try when studying for your next test.

[math]square[/math] Make it Rhyme: 5 met 4 at 20's door (5 x 4 = 20)

[math]square[/math] Use a Mnemonic or Acrostic: ROY G. BIV (colors of the rainbow - red, orange, yellow, green, blue, indigo, violet)

[math]square[/math] Create a Visual: Draw a picture that reminds you of the word or concept (plait - draw a cartoon of a girl with a long braid carrying a plate)

[math]square[/math] Sing a Song: Make up a song and set it to a common tune (Sung to "Row, Row, Row Your Boat" - Square, triangle, pentagon; Polygons are all three; Circles have no corners or sides; So polygons they can't be)

[math]square[/math] Chunk It: Break facts into smaller amounts, look for patterns (Phone numbers written in groups of 3-3-4 are easier to remember then if all ten numbers were strung together)

[math]square[/math] Storytelling: Create a silly story using the vocabulary or concepts you need to know.

[math]square[/math] Graphic Organizers & Timelines: Use graphic organizers and timelines to create a visual picture of how facts relates to each other.

[math]square[/math] Use Color: Color code facts (identify parts of speech by assigning a color - all nouns are red, verbs are blue)

[math]square[/math] Move!: Associate a movement with each fact you need to remember; pace while you recite facts; bounce a ball once as you say each fact; "write" the fact in the air with your finger

[math]square[/math] Create Your Own Technique:


See which of the three strategies you find the most helpful. Next time you need to memorize facts, use the strategy that you liked the best and try two new ones. Do this until you find at least three ways to memorize that work for you!
Grade 4 Arithmetic and Number Concepts
The            counting           numbers are used to count things.

Numbers 0, 1, 2, 3, and so on are called         whole        numbers.

           Negative           numbers describe locations when there is a zero point.

A number that has exactly 2 different factors is a         prime         number.

         Digits         are one of the number symbols (ex. 1, 2, 3).

A                     place-value chart                    shows how much each digit in a number is worth.

The position of a digit in a number is called its         place        .

How much a number is worth in its position is called the         value        .

Numbers that are products of 10 are called                powers of 10               .

The raised digit in 10 is called an            exponent           .

10 is called an                        exponential notation                       .

A                     standard notation                    is a number written in a place-value way.

A number that is one and has 3 or more different factors is called a             composite             number.

In the problem 7x3 = 21, 21 is a            multiple            of 7.

In the problems 3x4 = 12 and 2x6 = 12, 12 is a                   common multiple                   of 2, 3, 4, and 6.

The smallest number that is a multiple of 2 or more number is called the                         least common multiple                        .

A method in which sums are found for each place separately then added for the final answer is the                partial-sums                method.

The method where numbers are placed in place-value columns, and then 10-for-1 trades are made until the columns have only one digit is called the                   column-addition                   method.

The method where you "trade" 1 from one column for 10 in another column is called the               trade-first               method.

The method where you subtract two numbers by counting up from the smaller number to the larger number is               counting-up               method.

A method in which the differences are found for each place separately then combined for the final answer is the                       partial-differences                       method.

The                    same-change rule                    is if you add or subtract the same number from both numbers in the problem, the answer is the same.

A method in which products are found for each place separately then added for the final answer is the                    partial-products                    method.

A method in which quotients are found for each place separately then added for the final answer is the                     partial-quotients                     method.

An old way to multiply multiple digit numbers using boxes that are divided in half is the                  lattice method                 .

        equal         also means the same.

      Sum       is the answer to an addition problem.

             Difference              is the answer to a subtraction problem.

          Product           is the answer to a multiplication problem.

           Quotient            is the answer to a division problem.

Numbers that are added together are called           addends          .

Counting numbers that are multiplied together are called           factors          .

The number that is being divided is called the            dividend           .

The number that is doing the dividing is called the           divisor          .
Previous Page 158 of 159 Next
You need to have at least 5 reputation to vote a question down. Learn How To Earn Badges.