Want to see correct answers?
Login or join for free!

Search Results for complete - All Grades

2427 questions match "complete". Refine Your Search

Select questions to add to a test using the checkbox above each question. Remember to click the add selected questions to a test button before moving to another page.

Previous Page 122 of 122 Next
Grade 2 Story Elements CCSS: CCRA.R.1, CCRA.R.3, CCRA.R.5, RL.2.1, RL.2.3, RL.2.5
Colleen was having a bad Friday. First she woke up late. Then she tripped on her way to the bathroom and hurt her knee. When she got to the bathroom, her brother Kyle was in there, and she had to wait five whole minutes until she could use it. She ran back to her room to get dressed for school, and when she finally was able to use the bathroom, Kyle had left the floor wet. Her socks were completely soaked from walking across the wet floor, and they were her last clean pair for the week! She decided to take off her wet socks and try to let them dry on the way to school. She went downstairs to grab something to eat before she left for school. Her mom was in the kitchen as she grabbed a banana and headed for the door. As she ran out of the door her mom called after her, "Where are you going Colleen?"

"School, I'm running late!" She yelled over her shoulder.

"But today is Saturday." Her mom called after her.

She stopped and turned around. Her mom was in the doorway with a smile on her face. Colleen smiled back and walked back into the house, happy she wasn't late for anything.


What is the setting of this passage?                   Colleen's house                  

What is the problem in this passage?                               Colleen is late for school.                              

What is the solution to Colleen's problem?                                                        She's not late for school because it is the weekend.                                                       

Name a personality trait of Colleen.                                     tardy/late, clumsy, distracted...                                    
Grade 4 Sports (Stories) CCSS: CCRA.R.2, CCRA.R.10, RI.4.2, RI.4.10
Fill in the blanks to complete the passage.

Step 1: Get Fouled
This is a strange step, but in game situations you cannot get to the        free        throw line without getting fouled.

Step 2: Collect Yourself
You may be mad about the foul or tired from running back and forth. Take a deep          breath          and enter the half circle.

Step 3: Perform your Pre-Shot Routine
You should have a routine that you do         every         time you receive the ball at the charity stripe (free throw line). You might dribble with your left hand, spin the ball, and then shoot, or maybe you take one dribble, pass the ball around your body, take one dribble with each hand, and then get ready to shoot. Make your routine fast. You only have roughly 15 seconds to do it. It should be comfortable and        easy        to do each time.

Step 4: Bend your Knees
Many people come up short on their free throws           because           they do not use their legs. They are an important power aspect.

Step 5: Tuck your Elbow
It helps you use proper        form        and make a good accurate shot.

Step 6: Shoot the Ball
Don’t wait too long or you will psych yourself out. Do what you do best and shoot the ball. Don’t hesitate or rush it. Take your        time        and execute.

Step 6: Get Back on Defense
Don’t let the other players rush back on you         after         you make/miss your free throw.
Grade 3 Nature and Science (Stories) CCSS: CCRA.R.2, CCRA.R.10, RI.3.2, RI.3.10
Fill in the blanks to complete the passage.

If you have ever seen a golf ball, you know it is a small         round         ball with a lot of little ridges or holes on it. Those ridges or         holes         are called dimples.

Golf balls were not always made with           dimples          . The         first         golf balls were made from leather. They were stuffed with goose            feathers           . Some people called them featheries. All balls were made by hand and very             expensive             to buy.

In the 1840s, the guttie ball was introduced. It was        made        of rubber. In the 1880s, the gutties began to be made with patterns on the balls. The most popular           pattern           was called Bramble. It was a series of         bumps         in circles on the balls. The bumps became popular because golfers realized that scratches and bumps on the           surface           helped the        ball        travel further.

In the early 1900s, the golf balls golfers       use       today were first developed. They were made of two halves fused            together            so they had air in the middle. This made them           lighter           and helped them travel further. Companies then added the dimples to make the balls able to travel even           further           and much faster.

Why do dimples make the balls travel faster and further? They create multiple layers of       air       around the ball. One layer moves          faster          than the other, which helps increase the ball's speed. Most golf balls         today         have between 300 and 500 dimples.

Companies are constantly           testing           the number, depth, and position of the dimples to try to make sure they have the        best        golf ball available for every golfer. Some golfers may want a ball with more dimples. Some may want a ball with         fewer         dimples. It all depends on how they        play        the game.
Grade 4 Supporting Details CCSS: CCRA.R.3, RI.4.3
To make the kite you will need: two round sticks (one 24 inches long, one twenty inches long), a heavy trash bag, masking tape, lightweight string or fishing line, a craft knife, a ruler, a pen and ribbon.

Step One: Cut a notch into each end of the sticks using the craft knife.

Step Two: Measure six inches from one end of the longest stick and make a mark on the stick with the pen. Then measure ten inches from one end of the shortest stick and make a mark on that stick.

Step Three: Place the shorter stick over the longer stick to make a cross-like shape with the two sticks. Match up the marks on each stick and wrap them together with the string in a crisscross pattern.

Step Four: Starting from the center of the kite, thread the string in the notches on the ends of each stick to frame a diamond shape for your kite. Tie the end of the string in the center of the two sticks.

Step Five: Lay the trash bag over the frame and cut it in a diamond shape that is a little larger than the frame of the kite. Fold the edges of the trash bag over the frame and tape them down.

Step Six: Cover the top and bottom tips of your kite with tape, punch a hole in the tape and tie a two foot piece of string from the top hole to the bottom hole at the back of the kite.

Step Seven: Knot one end of the remaining string in the middle of the string you just attached to the kite.

Step Eight: Tie a long ribbon to the bottom of your kite.

Which of the materials will you need to complete Step Six of the instructions?
Grade 3 Nature and Science (Stories) CCSS: CCRA.R.2, CCRA.R.10, RI.3.2, RI.3.10
Fill in the blanks to complete the passage.

If you have ever seen a golf ball, you know it is a small round ball with a lot of little ridges or holes on it. Those ridges or         holes         are called dimples.

Golf balls were not always made with           dimples          . The first golf balls were made from leather. They were stuffed with goose feathers. Some people called them featheries. All balls were made by hand and very             expensive             to buy.

In the 1840s, the guttie ball was introduced. It was made of rubber. In the 1880s, the gutties began to be made with patterns on the balls. The most popular           pattern           was called Bramble. It was a series of bumps in circles on the balls. The bumps became popular because golfers realized that scratches and bumps on the surface helped the        ball        travel further.

In the early 1900s, the golf balls golfers use today were first developed. They were made of two halves fused            together            so they had air in the middle. This made them lighter and helped them travel further. Companies then added the dimples to make the balls able to travel even           further           and much faster.

Why do dimples make the balls travel faster and further? They create multiple layers of       air       around the ball. One layer moves faster than the other, which helps increase the ball's speed. Most golf balls         today         have between 300 and 500 dimples.

Companies are constantly testing the number, depth, and position of the dimples to try to make sure they have the        best        golf ball available for every golfer. Some golfers may want a ball with more dimples. Some may want a ball with         fewer         dimples. It all depends on how they play the game.
Grade 4 Sports (Stories) CCSS: CCRA.R.2, CCRA.R.10, RI.4.2, RI.4.10
Fill in the blanks to complete the passage.

Step 1: Get Fouled
This is a strange step, but in game situations you cannot get to the        free        throw line without getting fouled.

Step 2: Collect Yourself
You may be mad about the        foul        or tired from running back and forth. Take a deep          breath          and enter the half circle.

Step 3: Perform your Pre-Shot Routine
You should have a routine that you do         every         time you receive the ball at the charity stripe (free throw line). You might dribble with your left hand,        spin        the ball, and then shoot, or maybe you take one dribble, pass the ball around your body, take one           dribble           with each hand, and then get ready to shoot. Make your routine fast. You only have roughly 15           seconds           to do it. It should be comfortable and        easy        to do each time.

Step 4: Bend your Knees
Many people come up         short         on their free throws           because           they do not use their legs. They are an             important             power aspect.

Step 5: Tuck your Elbow
It helps you use proper        form        and make a good            accurate            shot.

Step 6: Shoot the Ball
Don’t wait too        long        or you will psych yourself out. Do what you do best and shoot the ball. Don’t            hesitate            or rush it. Take your        time        and execute.

Step 6: Get Back on Defense
Don’t let the other           players           rush back on you         after         you make/miss your free throw.
Grade 7 Summarizing CCSS: CCRA.R.2, RL.7.2
The Road Crew
by Bryan Ellett

Seth watched out the front window as a crew of about 10 people worked hard to destroy parts of the street in front of his house. There was a large sign down at the end of the street describing the construction project underway. It said, "Road Resurfacing. Expected completion: Fall 2009." The sign did not explain what Seth was watching out his front window. To Seth, it appeared that the destruction was somewhat random.
One man sat in the seat of a large piece of construction equipment that Seth's dad told him was called a backhoe. This giant piece of metal machinery had a scoop with jagged metal teeth at the end of a long arm, and the operator was controlling the arm and scoop with two joysticks. He would raise the arm high in the air, with the teeth of the scoop pointing downward. Then, he would bring the arm down quickly and with great force, using the teeth of the scoop to crush the concrete that it landed on. Already, this gentleman had ripped out the entire portion of sloped concrete that connected the driveway of Seth's house with the road. Several workers came along and hauled away the large pieces of concrete left behind.
Another worker was in charge of a large circular saw. He would wheel the saw to a particular piece of the road and fire it up. The spinning of the saw, even before it began cutting, created a high whining sound. Then, he would lower the saw into the concrete and cut long sections of the road. The piece of the road Seth watched him cut was about eight feet long and two feet wide. Seth could tell that the saw operator was working extremely hard.
Seth stepped into his front yard and looked up and down the street. Nothing made sense. Several other houses had the front portion of their driveway ripped out just as Seth's had been. But there were several more houses whose driveways were untouched. There were slices of road cut out here and there, but Seth could see no pattern to the places that were cut up. He could even see one worker filling in a recently cut piece of the roadway with fresh cement. Was there any point to what they were doing, or were they just breaking things and putting them back together to kill time? Seth had no way to know, so he just went back to the window to watch. It might not make sense, but, for Seth, destruction was fun to watch.

Which of these best summarizes the last paragraph?
  1. Seth noticed that one worker was filling in with concrete one of the holes that had been cut.
  2. Seth saw that some driveways were being ripped out while others were not being touched.
  3. Seth was happy to be watching workers from his window because he enjoyed watching destruction.
  4. Seth did not understand why only parts of the road were being destroyed, so he decided to just watch and enjoy.
Previous Page 122 of 122 Next
You need to have at least 5 reputation to vote a question down. Learn How To Earn Badges.